- Joined
- Jun 19, 2019
- Messages
- 203
- Reaction score
- 66
Ok all I need some ideas to re plumb my UV sterilizer pump. So I did an online configuration so I could set it up for a loop connection. I have the current eFlux 3170 GPH pump set up to feed the UV sterilizer. So my issue with my current configuration, that’s a week old lol, I had to put 9 elbows from the line from the DT to the return Back to the DT. With the elbows and the length of pipe I have about 18.5’ HP so sad to say my flow meter is only showing 647 GPH and I need around 1800 for bacterial/algae prevention.
anyone done a close loop set up like this for a UV or would you guys, and gals just do it from the sump back to the DT?
what are your system setups like, GPH, pumps using pipe set up, etc. Any help or opinions/advise would be great. Thanks all!
anyone done a close loop set up like this for a UV or would you guys, and gals just do it from the sump back to the DT?
what are your system setups like, GPH, pumps using pipe set up, etc. Any help or opinions/advise would be great. Thanks all!