What version number do you have?Got my light in. I haven’t narrowed down the settings yet but here it is mounted on a 32 gallon BioCube (fits over the rim no problem). That said, I ran into the same issue as others with the tank mount part of the bracket with the screws being almost too small. I used a piece of thick plastic mesh as I didn’t have washers to secure it better.
Also, the remote is junk. It worked 50/50 for me but the controls on the light are easy enough to work.
Oh the shimmer - With the water surface agitation, absolutely amazing shimmer in my opinion, very close to my halides
Regarding the fans, not sure about others, but mine has a setting on it where I can change the temperature that the fan comes on at? It’s set at 35 degrees Celsius (stock setting) but it can go up or down. It’s under “temperature” setting.
No par readings as of right now (don’t have a par meter, don’t know anyone (including local clubs) that have one, and don’t have the funding to risk a BRS “rental”
Moonlight setting - 1% on Channel 3 is way to bright and 1% on Channel 4 is way to purple. If you want moon lights, gotta figure something out separately.
This is lights at 40% everything except green at 30%:
The Shimmer:
SmatFarm LED Shimmer
youtube.com
Mine says 2.0 under version and when I look under the temperature menu there are no options to set, it just shows the current temp and whether the fan is currently on or off.
I tried every button on the unit and remote and have no way to set the fan based on temp.
My fan comes on and stays on if any light is set above 19%