Sump cracked, sump support question

  • Thread starter Thread starter ryeguyy84
  • Start date Start date
  • Tagged users Tagged users None

ryeguyy84

Well-Known Member
View Badges
Joined
Dec 22, 2011
Messages
535
Reaction score
338
Location
New Jersey
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
My sumps bottom seam broke, it was acrylic and it turns out the bottom of my stand is 1/4 maybe less plywood. Hence the sump cracking.

My question is what thickness should I get for under a sump. The new one is an icecap 30 so 30" x 15.75". The current plywood is supported on the edge, it held up perfect (thank you Rust-Oleum paint) to hold the water coming out of the sump so I'm planning on keeping it and just adding a new bottom to support the sump.
 
I did a 3/4” plywood and a layer of the adhesive leveling mat underneath my acrylic sump.

*as recommended by the stand manufacturer when I asked about it
 
My sumps bottom seam broke, it was acrylic and it turns out the bottom of my stand is 1/4 maybe less plywood. Hence the sump cracking.

My question is what thickness should I get for under a sump. The new one is an icecap 30 so 30" x 15.75". The current plywood is supported on the edge, it held up perfect (thank you Rust-Oleum paint) to hold the water coming out of the sump so I'm planning on keeping it and just adding a new bottom to support the sump.
1/2" to 3/4" plywood and you should be able to repair crack with Weldon 3
 
I did a 3/4” plywood and a layer of the adhesive leveling mat underneath my acrylic sump.

*as recommended by the stand manufacturer when I asked about it
What is an adhesive leveling mat? Is that like a foam that sticks to the bottom?
 
just use a medium density foam of ablout 1/8"-3/16". I dont glue mine I just place it under the tank
 
1/2" to 3/4" plywood and you should be able to repair crack with Weldon 3
Thank you, I was leaning toward 3/4 so I'll see what I have in the garage.

You're probably right about the crack, but I hated that sump from day one and honestly I'm kind of glad it failed. especially since nothing flooded and a shop vac took care of the water in the stand. My local store brought over a sump same day and helped me pull the old one out, the owner lives 2 houses down so it's a nice perk :)
 
just use a medium density foam of ablout 1/8"-3/16". I dont glue mine I just place it under the tank
It's hard to see but there's a pretty nice gap
 

Attachments

  • 16676161913112220837194384464993.jpg
    16676161913112220837194384464993.jpg
    68.8 KB · Views: 49
once you put down the thicker ply it should be almost flat i would think so you probably dont need the extra thick foam
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 11.8%
  • Lighting, pumps, or other major equipment

    Votes: 2 11.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 11.8%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 11.8%
  • Corals! Must...Have...CORALS!!!

    Votes: 4 23.5%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 5.9%
  • I’m browsing, but don’t have a specific target

    Votes: 2 11.8%
  • I’m not shopping for reef deals this year

    Votes: 1 5.9%
  • Other (Post in the comments)

    Votes: 1 5.9%
Back
Top
Home
Post thread…
Market
What's new