From my research - they, whoever they are, indicate that a sump should be 20% of the display size allowing for enough room for the installed equipment. I also believe that most of us run them at 50% capacity to accommodate water height for skimmers and enough head room in the event of a pump failure. Therefore, is the 20% the entire volume or usable volume?
1. 200gal display, 40 gallon sump holding 20 gallons of water, or..
2. 200gal display, 80 gallon sump holding the required 20% / 40 gallons of water.
For my project FOWLR, I would want to build something that would be sized towards a high bio-load as I don't want to upgrade in the future.
TIA
1. 200gal display, 40 gallon sump holding 20 gallons of water, or..
2. 200gal display, 80 gallon sump holding the required 20% / 40 gallons of water.
For my project FOWLR, I would want to build something that would be sized towards a high bio-load as I don't want to upgrade in the future.
TIA

