- Joined
- Jun 17, 2018
- Messages
- 64
- Reaction score
- 195
- What state or country do you live in
- Arizona
Do you mind linking that product not really familiar with it
https://www.facebook.com/pg/XeptaReef/posts/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Do you mind linking that product not really familiar with it
I was lucky and logged into BRS at 250am
I was able to snag my Trident and opted for next day shipping.
As luck would have it there was a delay in Texas but luckily it got to me today just about 1pm.
The outer box had some dents but the inner box wasn’t damaged.
Packing was good but I did have an issue with a leaking reagent.
I notified Neptune systems and they called me within 30 min and arranged for 50% off which I was actually proud of.
The setup was a total breeze and I had it up and running in less than 15 min.
The first test took a bit of time but the results were dead on considering shipping and only factory calibration.
I’m honestly impressed and have had no issues whatsoever (save the leaky bottle.
For reference here is the first results from the trident and what I got using Hanna for Alk and Ca and Aquaforest for Mg
Trident
Alk 7.94
Ca 455
Mg 1436
Hanna
Alk 8.1
Ca 449
Aquaforest
Mg 1440
I would say that’s pretty dang good.
And I didn’t have to measure or cut anything.
I didn’t have to figure out what doser goes to what
And I don’t have to mix reagents
And I get Alk, Ca, and Mg results
Not just Alk
I think they did great. I applaud both BRS and Neptune Systems.
Reef Bot tests more:) But takes 2 test kits to fill reagent containers:( Add that up and for 5 tests your looking $400 in Canada:(Just buy a Reefbot way more versatile.
Salifert KH/ALKALINITY AQUARIUM TEST KIT 16.46 plus LINGANZH Smart Power Strip 23.98. You guys and your gadgets, I think everyone is losing sight of the goal. But I'm just an old fart who has a grudge against to much technology.
Having worked on product launches in the auto industry, limited product can definitely be a strategy to minimize customer issues and warranty exposure. Unfortunately many companies believe "giving the customer their money back" makes things OK, you still have an inferior product. If you have a product you have confidence in and are proud of you want to be sure you have a strong pipeline at start up so you don't lose sales and create customer dissatisfaction. Demand is typically at its peak at the beginning of a highly anticipated product. It seams to me the short time the product was in the hands of the "insiders" (as little as 3 months) gives virtually no time for issue identification, fixes implemented, and fixes validated. Hopefully, the insiders were the final validation, with no issues. I very much want this product, even though I am very happy with my Alkatronic. I hope this all works out.That sucks
Maybe you got lucky though these things are usually very buggy
It has been for two years i think they released a small amount to limit the returns etc it’s going to be tested on those people that did get it
Having worked on product launches in the auto industry, limited product can definitely be a strategy to minimize customer issues and warranty exposure. Unfortunately many companies believe "giving the customer their money back" makes things OK, you still have an inferior product. If you have a product you have confidence in and are proud of you want to be sure you have a strong pipeline at start up so you don't lose sales and create customer dissatisfaction. Demand is typically at its peak at the beginning of a highly anticipated product. It seams to me the short time the product was in the hands of the "insiders" (as little as 3 months) gives virtually no time for issue identification, fixes implemented, and fixes validated. Hopefully, the insiders were the final validation, with no issues. I very much want this product, even though I am very happy with my Alkatronic. I hope this all works out.
Yes. Works for me well since I have a Calcium Reactor and frequent water changes. Alk tends to be the most critical.Seems like what they were going for
Alkatronic only tests alkalinity right?
I will get one eventually......I have been testing manually for 10+ years......a few more months isn't going to make a difference :)
I was lucky and logged into BRS at 250am
I was able to snag my Trident and opted for next day shipping.
As luck would have it there was a delay in Texas but luckily it got to me today just about 1pm.
The outer box had some dents but the inner box wasn’t damaged.
Packing was good but I did have an issue with a leaking reagent.
I notified Neptune systems and they called me within 30 min and arranged for 50% off which I was actually proud of.
The setup was a total breeze and I had it up and running in less than 15 min.
The first test took a bit of time but the results were dead on considering shipping and only factory calibration.
I’m honestly impressed and have had no issues whatsoever (save the leaky bottle.
For reference here is the first results from the trident and what I got using Hanna for Alk and Ca and Aquaforest for Mg
Trident
Alk 7.94
Ca 455
Mg 1436
Hanna
Alk 8.1
Ca 449
Aquaforest
Mg 1440
I would say that’s pretty dang good.
And I didn’t have to measure or cut anything.
I didn’t have to figure out what doser goes to what
And I don’t have to mix reagents
And I get Alk, Ca, and Mg results
Not just Alk
I think they did great. I applaud both BRS and Neptune Systems.
Same here, I’m not that old but... I don’t get the hype. Sure makes testing easy but it’s not going to make my tank look any better. Lol
Waiting for my apex classic to quit before sinking SO much money into a new controller and tester.