Used a magnetic stirrer for 4 hours. These photos were taken at 3:25pm yesterday and today at 9:37am. There is no precipitate at the bottom that I can see so it's thoroughly in solution.
Followed the 1 L recipe but I simply multiplied everything by 5 which led to:
5 liter recipe:
However, I did not follow the steps chronologically. I believe I started with the biomag, trace elements, then the carbocalcium powder. Could this be the cause?
Followed the 1 L recipe but I simply multiplied everything by 5 which led to:
5 liter recipe:
- Step 1: Starting with a clean container with at least 5 liter capacity, add 3,750 mL RODI water. Room temp water is ok, but warm water will help dissolve the powder more quickly.
- Step 2: Slowly add 700g CarboCalcium powder, stir continually.
- Step 3: Add 60g Bio-Magnesium powder, stir continually.
- Step 4: Add 500 ml Pro-Trace A-
- Step 5: Add 500 ml Pro-Trace K+
- Step 6: Keep stirring. It can take some time for the solution to be clear. Estimate ~20 mins. Solution will be a tint of blue, this is normal.
However, I did not follow the steps chronologically. I believe I started with the biomag, trace elements, then the carbocalcium powder. Could this be the cause?