VIDEO :: Improve flow without pumps or powerheads

[MarineDepot]

VIDEO :: Improve flow without pumps or powerheads

Increase flow up to 400% by adding an Accel Aquatics Flow Accelerator!

 

[tfp]

That's old school eductors - re-branded.

 

[crowndroyal]

That's old school eductors - re-branded.

Yup used these long ago , they have almost been forgotten then bam someone tries to bring them out again.

 

[Antics]

I'm curious to know if this work with Locline?

 

[pfoxgrover]

Don't these only make sense with old school high head pressure pumps?

 

[loui]

They do not work with loc line, they really missed the boat on that one not making them compatible.

 

[Phil Cusimano]

Boring ... ancient stuff repackaged didn't even remember these accelerators still existed. LOL

 

[markstubb]

they can compress water?! what sort of black magic is this?!

 

[fmp47]

Do they really work? Or is it alchemy?

 

[Paul B]

I am more old school than all of you and I like the idea. Old or not they have an application in many tanks.
I use very old school, 30 year old pumps. :D

 

[Breadman03]

Do they really work? Or is it alchemy?

They work quite well by using the Venturi effect. Basically, they shoot a small, fast stream of water through the center. This creates a low pressure zone that pulls tank water in the sides of the nozzle and results in a large amount of water flowing out the front of the nozzle.

 

[West1]

Interesting, this is my first time seeing something like this. I might try these.

 

[markstubb]

Do they really work? Or is it alchemy?

I was just cracking a joke since it's not possible to compress water and that's what was said in the video. It's more about venturi and pressure, as described by breadman

 

[Fourstars]

They work great, decrease volume a bit, but a lot more flow. You need to use a pressure rated pump to get the most benefit.

 

[West1]

They work great, decrease volume a bit, but a lot more flow. You need to use a pressure rated pump to get the most benefit.

I'm a little confused, I always thought volume was flow?

 

[Fourstars]

Me too. Mass flow rate is the amount of mass passing a point in a given time. Volume is the amount of volume passing . If i remove my Accelerator, i have to add 5 gallons to my sump to keep at the same level, while the flow in the DT slows. Think of the Accelerator as a little jet engine, the reduction at the nozzle caused flow at the low pressure area on the sides. Or something like that.

 

[markstubb]

Since water is incompressible, mass has to equal volume. This makes sense for any compressible gas, but not liquid, IMO

*edit - i think the thing you're looking for is more water from the DT is recirculated through this nozzle, as opposed to flow only being from the return pump into the DT.

 

[Fourstars]

Sure you can compress water, you just need a little bit of pressure.

 

[West1]

Me too. Mass flow rate is the amount of mass passing a point in a given time. Volume is the amount of volume passing . If i remove my Accelerator, i have to add 5 gallons to my sump to keep at the same level, while the flow in the DT slows. Think of the Accelerator as a little jet engine, the reduction at the nozzle caused flow at the low pressure area on the sides. Or something like that.

So it slows the overflow but creates more water movement, pretty cool.

 

[Phil Cusimano]

they can compress water?! what sort of black magic is this?!

ROFL ... Black Magic? Maybe voodoo!