I did put the high intensity lens kit on the xr 15 to get more par
How did you attach that blade?Hello all I have a red sea reefer 200 g2 and currently I’m running a radion xr 15 g6 blue with 2 ai blade glows attached. I’m wondering if this setup is sufficient for a mixed reef or if I should swap the xr 15 for an xr 30?
Aqua illumination sells a hybrid kit for radions
Just thought I would update this thread. I went and I got a Par meter and took some readings. My XR 15 G6 blue is set at 60% on AB plus with the high intensity, lens kit and my two AI blade 12 inch coral glows are set on a custom setting at 80% with the royal blues at 135% the violet is at 108% and uv at 30% after taking the readings. Here are the numbers I’m going to post a picture for reference of my tank directly on top of the torch is receiving 370 directly under my digit to is receiving 350 directly under the hammer is receiving 225. Everything up at the top of the rocks is between 260 to 230 with the middle topic being 380 in the very right being 330 a lower middle closest to the Duncan Coral is 284 and right on top of the Duncan is 233 the Rockledge below the torch is 230. The left back corner wall is 101 the right back corner wall is 112 and the sand bed from left or right is even at a consistent 170 and right on top of my Zoas is 199. Tank is a red sea reefer 200 G2.
