diy acrylic

I’m redoing the baffles in my refugium, but I don’t want to drain and dry the whole thing to silicone in the new baffles. It’s kind of the heart of my whole system. I’m wondering if there are any products out there that use a magnet on the can simply hold the baffles in place, also so I can take...

i have a 100 gallon 5 foot tank looking to use the space under the tank better as my sump takes up about 60-70 percent of the underside i want to add in full auto waterchange but am out of room given size of what is below (sump has waisted space could save like 6-8 inches length if i built my...

I’m trying to make a floating rock shelf for my reef tank and I’m not sure what materials would be best. My tank is 24” L 14” W so not big but I want the entire reef elevated about 1 1/2 to 2 inches above the sand with nothing touching the sand to support it Should I use cast acrylic or...

Goal is to merge two 30g sumps together using a pair of three inch bulkheads. I’d love to have the tanks sandwiched together like I have illustrated in my drawing. Is this possible? In researching I’ve only really seen a bulkhead in each tank with a connecting PVC pipe. I assume I’d have to add...

I bought the fiji cube 20 long DIY sump kit and it says i need the things in this pic of the directions, but I can’t find any “acrylic plastic silicone” online in general let alone anything that says it’s safe for aquariums. Any recommendations or ideas as to where i can find it?

Does anyone know the steps in creating a custom automatic fleece roller? It seems no one took an interest in making an automatic fleece roller for the completely rare rectangular filter sock opening. If anyone can lead me to the right direction or if anyone knows of a company that makes one for...

I always thought it wouldn't make a difference unless you were doing bare bottom, but after seeing eshop's recent release of nano tanks and the effect that the florescent orange bottom has on the tank I'm beginning to wonder if it would have the same effect on a bigger scale. Like if I were to...

I’m looking into building my own aquarium soon like tomorrow and couldn’t find a bottom glass piece 36x24 but was able to find a 36x24 3/16” Acrylic as a replacement. Can I use silicon to bond both acrylic and glass together? I would prefer the bottom be acrylic that way I can drop in holes for...

I’ve just ordered a Waterbox Peninsula 4820! While awaiting arrival, I’m going through the planning stages and I would really like to have some type of canopy. My thought is to try using some black opaque acrylic sheets and gluing them together into 3 pieces so that it will slide on and off of...

Dupe, please delete

Always looking to keep my interest peaking in this hobby. I like creating so I’m looking at this hobby ways to do things different while sticking to the basics. this a DIY 2.5g which is a mimic of my other nano tanks, which are much larger. going shopping for some new coral tomorrow looking to...

bieng on a budget getting a full reef tank filled with corals i thought why not go smaller. i love the maintaining part of it. i know smaller is harder but i love that challange. i got this little Dennerle tank and made a internal sump with black acrylic with the help of my handy grandpa. got...

So building a small acrylic tank, test how easy it is. It's only tiny, but I filled it with water today, and I think I have a small leak It's only one side. I used a different glue on that side compared to the rest. On that side, I used Tensol 12 compared to the other side using Acrifix 192

Anyone else built their own acrylic tank with built in filtration? Would love to see pictures!!! Here is my build- 36x24x12”

Hello! Wasn’t sure where to post my question. I just got into the hobby. Decided to save some money and build an acrylic tank. My tank is 36x24x12 (lwh). Sides are 3/8” and bottom is 1/4” thick.I have attached some pics as well. Before I add water and start cycling, I was wondering if anyone...

Hi Reefers. Its been few weeks i was Searching for some details on a DIY Wave Box , but couldnt find simple detailed making procedure specially on youtube or r2r. Therefore I decided to Try to make one myself with Hit and Trial and It Worked Wonderfully. Here are some details 1. Using a Used...

Namaste y'all, Sammy here from Eastern india. I am having another foray into reefing after a long while. I was 16 when I started my first setup, I am 27 now. I had a 3 feet, 70 gal setup with mostly Lps, a huge sebae anemone, few tridacna clams, tubastrea and nps gorgs, and few acros too, with...

Hi. I’m currently planning on making a DIY AIO tank. I’m planning to use acrylic as the back compartment (overflow and baffles) and ive ordered them seperate of each other. How do I connect the acrylic sheets to each other? And how do I connect it to the glass? I’ve also bought some black...

Hey Everyone! I just finished building an acrylic nano dropoff that holds water but has lots of air bubbles at the seams and joints. I go to an engineering college and have access to a laser cutter. After cutting, I run into the problem of the edges that were cut have a slight angle to them...

For many reasons I've decided to build a 38' diameter geodesic dome to house an aquaponics system. This will be the culmination of many years of ideas and components coming together. I'd like it to be a functional space to grow fish and produce to eat, and also an idyllic retreat for relaxing...

Hello there, I am in desperate need of help. After months of research I have finally purchased enough acrylic to build two tanks. One will be about 20 gallons (as a practice tank) and one will be 150 gallons. Before I touched any of that material I bought a 1 square foot x 1/2” thick cast...

Hi everyone. Been lurking around here again for the past week or so since I got the itch to start another reef tank. Long story short, like several of you I have been in and out of the reef hobby. Started when I got out of the military back in '99, setup my first tank late that year (15 High...

See my recent build here, a nice and very professional frag tank with a nice acrylic sump I had studied all the details carefully before I start, please let me know what you think? Tank dimenstions: 120x70x35 cm Glass thickness 12mm

Hey guys, I just finished up my two month long build process, from 2D Design, 3D design, sourcing Acrylic during an Acrylic shortage, sourcing a reliable CNC shop for my product, and designing a logo. I've designed and built everything myself, and wanted to share with you guys my finished...

I’m looking for someone to help me construct a filter sock holder that will fit in a 90 gallon diy sump. I purchased a tank that came with a standard 90 gallon tank/diy sump. It has baffles but no sock holder/ overflow silencer. I could cut it all out by hand but if someone could help me it...