overflow box

Looking for a Nano Eshopps Overflow for my 10g project, lmk what you have, thanks!

So I want to change the inside part of my overflow because I hate it, the box on the outside is fine I guess but the overflow “screen” drives me nuts, so my question is how can I change this to a normal overflow box? Is t possible? The drilled hole is 1 1/2 inches o just want a box inside my...

I just finished drilling my tank for an overflow, followed the template, and the interior box hits the glass lip on the inside of the tank. Most tanks I've looked at don't have the lip, so is it safe to cut that piece for some clearance? What is the best way to cut glass that thick that is...

This guy recently split. Yesterday he shrank down small enough to go through the weirs of the overflow box and now he is anchored in the corner where I can barely touch him with a pencil. What the heck can I do to get him to come out???

Hi all, I probably should have posted it here in DIY section but I was not sure where it may fit in. I was wondering what was the best way to move forward with this problem and if you had any insights, that would be great. Here is original post...

Hi all! For a little background, my boyfriend has been planning his reef tank for about eight years (he even chose his apartment in the city he lived in before we met so it could sustain a 400 gallon reef tank). After a 29 gallon gift, 100 gallon tank COVID project, we now have a 100gal tank...

Scraped this off the back of my 10 gallon nano. Tried to just use ceramic Magnets to allow to adhere naturally but consensus is that this is asking for trouble. got after it tonight with the reef glue...have to press lightly but hold for 20-30 seconds but it will stick! Also have to make sure...

I am planning my first reef tank (75g that is currently freshwater) and am having trouble deciding on the HOB overflow that I am going to use. I cannot drill the tank because it is tempered so a HOB overflow is needed. Since it is in our living room, it would need to be as quiet as possible...

I recently purchased a 36-gallon Bowfront tank with the intent of establishing a reef. It has been a dream of mine for years now! After watching some videos I think that I will be able to drill it! Just have to call and confirm that the back is not tempered first. My question is... what size...

Hi Guys, new to R2R, but a long time lurker. I have been using this overflow for about 2 years now with no trouble, so I figured it was time to show it off! It will overflow about 2-300gph to my sump, and will automatically start and stop when the water level rises above the baffle just before...

I currently have a IM Fusion 20 about 3ft off the floor. I’m planning on adding a sump for additional water volume, clean look(hiding equipment), and a good sized Refugium for nutrient export but mainly for copepods. I cant/don’t want to drill the tank so a hob overflow box seems to be my best...

Overhead of rock work and shows most of coast-to-coast synergy reef v2 16" shadow overflow.

Hi You ALL, I have been reading, watching youtube vids, reading more, watching more videos, day and night, home and at work. Pretty much the last 3 months i have been all about saltwater fish tanks. At first i was looking at buying a 50 gallon tank bc i read that its the best beginner tank...

hey everyone, i’m looking to start an under tank refugium for my 30 gallon but drilling is not an option. i was wondering if you can post some links or recommend good or the best overflow boxes for my size? thanks! the fuge will be somewhere between 10-20 gallons

I am complete novice when it comes to sumps and plumbing. I have a 120g tank that's got a Trigger Emerald 34 Sump installed underneath it and a Reef Octopus Varios6 return pump. Since the tank is tempered glass, I have no choice but to go with the overflow method as a means of moving water to my...

Afternoon All, I thought a quick post regarding this product may help people with the same issues I faced. Having moved from a fully planted freshwater setup I was desperate to keep the original tank and stand (Evolution Aqua Aquascaper 900) 1. To save money 2. I like the overall appearance...

I knew the basement floor was unlevel, it with my custom coast coast overflow *48 inch. i still am only getting 3/4 of the length letting water in. I believe the right side lowered 1/8 at the most would solve the problem. Unfortunately this is a custom design I did, and the overflow does not...

I am working on putting together a new frag system. It will consist of a 40-gallon breeder and a Bashsea Smart Series sump. The sump has three 1.5" drain connections, which is helpful as I intend to use a Bean Animal configuration. However, that is where I need your assistance as I decided to...

Need something in the 600 - 1000 GPH range. Not picky on brand, Modular Marine,Eshoppe, Fujicube, Synergy, Reef Savy. Let me know what you’ve got.

I recently bought a drilled 125 and would like to build a sump/refugium under the tank. An overflow box is included that fell off the back of the tank so I cleaned all the old silicone off and plan to reattach it. Before I do, I want to get a good understanding of how the plumbing will work as...

I just bought this skimz overflow box last week to convert my JBJ AIO, well I found another tank I bought so I dont need the overflow. Paid 99.99 for it, I called about sending it back but there is a 10% restocking fee, so I figure if I can get 75$ out of it I I save someone a little money

I have a Zoo Med 50g Low Boy frag tank that I will be drilling. I have a custom made overflow box, similar to an Eshopps, that I plan on installing on one end with a single bulkhead. As for the return lines, which I am planning on using (2) 3/4" Loclines, one on each side of the overflow, is it...

Hey all, So I have the Synergy 16 Ghost Overflow and finally got it dialed in pretty good; it's nearly silent. But I was dealing with a noisy weir; seemingly coming from the water drop between the inner and outer box. I had adjusted the water level in the overflow as high as I could...

Lifereef Overflow (full size) w/standpipe - former owner made standpipe This design is recommended for aquariums up to 48" long or flow rates up to 600 gph.

I will update with a few more items as I get a chance to take some more pics. Now that my tank build is complete, I have a few items I no longer need to hold on to. UPDATED 8/28/18 : Bashsea Bio Fuge 24-10-14 Sump - NEVER USED, BRAND NEW with box : $200 picked up in Chicagoland - $235 shipped...