3D printed in florescent

[Wolters_88]

Looking for some urchin hats and a feed door in florescent colors. Seems nobody makes anything that glows in the tank.

 

[rpl782002]

Problem with glow in the dark colors, is the risk of chemical leach into a tank. Don't think people really trust them much in their tanks, where as PETG solid colors have proven themselves. My 2 cents anyways.

 

[Wolters_88]

Problem with glow in the dark colors, is the risk of chemical leach into a tank. Don't think people really trust them much in their tanks, where as PETG solid colors have proven themselves. My 2 cents anyways.

I’m not talking glow in the dark. I’m talking florescent PETG filament. The stuff that glows in the tank.

 

[Wolters_88]

Problem with glow in the dark colors, is the risk of chemical leach into a tank. Don't think people really trust them much in their tanks, where as PETG solid colors have proven themselves. My 2 cents anyways.

I’m not talking glow in the dark. I’m talking florescent PETG filament. The stuff that glows in the tank.

 

[cmross13]

USA - Mesh / Screen Top Feeding Portal

Mesh / Screen Top Feeding Portal Are you tired of having to remove your entire screen / Mesh lid? No worries!! Install this and you won’t need to remove again Simply lift up the small cover and you now have access to feed! Printed with PETG filament, which is reef safe. The filament we use...

www.reef2reef.com

his orange is pretty glowy under blues. not quite black-light glow, but not far off either

 

[Wolters_88]

USA - Mesh / Screen Top Feeding Portal

Mesh / Screen Top Feeding Portal Are you tired of having to remove your entire screen / Mesh lid? No worries!! Install this and you won’t need to remove again Simply lift up the small cover and you now have access to feed! Printed with PETG filament, which is reef safe. The filament we use...

www.reef2reef.com

his orange is pretty glowy under blues. not quite black-light glow, but not far off either

Ya, looking more for this.

Neon Orange UV Reactive Opaque PETG PRO

Neon Orange UV Reactive Opaque PETG PRO INTENSE Neon Orange, Fantastic eye catcher & UV reactive, glows brightly under black light. PETG is a newer printing filament and has the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS. Nearly ZERO warpage...

atomicfilament.com

 

[Reefnoobz90]

My Hanna organizer glows bright under tank lights. They also have orange that is florescent

 

[Wolters_88]

My Hanna organizer glows bright under tank lights. They also have orange that is florescent

Ya, just need somebody that does them.

 

[Clear Choice Aquatics]

we use the UV reactive filament we stock orange, green and yellow. We can print you the urchin hats just need an estimate on the size you need. Usually a little smaller than the urchin.

The feed door i'd have to design, I'm assuming you want one that fits onto a mesh screen top?

@Reefnoobz90 I remember that one, looking good

Our last atomic order:

TikTok

vm.tiktok.com

 

[Wolters_88]

we use the UV reactive filament we stock orange, green and yellow. We can print you the urchin hats just need an estimate on the size you need. Usually a little smaller than the urchin.

The feed door i'd have to design, I'm assuming you want one that fits onto a mesh screen top?

@Reefnoobz90 I remember that one, looking good

Our last atomic order:

TikTok

vm.tiktok.com

The urchins are only like 1.5” wide and yes it would be on a mesh top.

 

[Clear Choice Aquatics]

The urchins are only like 1.5” wide and yes it would be on a mesh top.

Okay, I have some nylon screws and nuts coming in on Monday. I'd like to recess the nut into the bottom frame so I'll start designing on Monday and I'll likely have a model for you the following day.

 

[Clear Choice Aquatics]

First run, not a huge fan of the thickness of the lid so I'm going to thicken it and have it sit on the bottom frame. I'll have pricing available with more pictures tomorrow. Honeycomb or standard mesh option for the lid.

 

[Clear Choice Aquatics]

Oh and it definitely glows

 

[Wolters_88]

Honeycomb. Can you do the hats too

 

[Clear Choice Aquatics]

Honeycomb. Can you do the hats too

Definitely, I didn't design those so I'm just going to charge filament cost plus electric to run a printer. If you decided to get the feeding hatch as well the difference is shipping will be cents. Which did you want?

As far as I can tell there are:

• a top hat
• a cap
• a French cap
• a crown
• a fairy / magician hat
• a viking hat

If you have a different thingiverse link with others let me know.

I found this one:

Playmo hats by tart2000

A set of 6 hats compatible with Playmobil figurines. You get: a top hat a cap a French cap a crown a fairy / magician hat a viking hat

www.thingiverse.com

 

[Wolters_88]

Definitely, I didn't design those so I'm just going to charge filament cost plus electric to run a printer. If you decided to get the feeding hatch as well the difference is shipping will be cents. Which did you want?

As far as I can tell there are:

• a top hat
• a cap
• a French cap
• a crown
• a fairy / magician hat
• a viking hat

If you have a different thingiverse link with others let me know.

I found this one:

Playmo hats by tart2000

A set of 6 hats compatible with Playmobil figurines. You get: a top hat a cap a French cap a crown a fairy / magician hat a viking hat

www.thingiverse.com

Actually this is the same as the six pack I was looking at.

 

[Clear Choice Aquatics]

Final design, I thickened everything up while keeping weight to 1.5oz so there's no sagging. The nylon nuts are press fit into the base and once in do not come out so there's no chance of losing them in the tank should you decide to install over the tank .

I pm'ed you pricing