- Joined
- Nov 4, 2019
- Messages
- 866
- Reaction score
- 361
Looking for some urchin hats and a feed door in florescent colors. Seems nobody makes anything that glows in the tank.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you for visiting the R2R Marketplace! Please consider becoming a Supporting Member today! In addition to all the perks of becoming a supporting member, this notice will also be automatically removed! Click here for more details and Happy Reefing!
I’m not talking glow in the dark. I’m talking florescent PETG filament. The stuff that glows in the tank.Problem with glow in the dark colors, is the risk of chemical leach into a tank. Don't think people really trust them much in their tanks, where as PETG solid colors have proven themselves. My 2 cents anyways.
I’m not talking glow in the dark. I’m talking florescent PETG filament. The stuff that glows in the tank.Problem with glow in the dark colors, is the risk of chemical leach into a tank. Don't think people really trust them much in their tanks, where as PETG solid colors have proven themselves. My 2 cents anyways.
Ya, looking more for this.USA - Mesh / Screen Top Feeding Portal
Mesh / Screen Top Feeding Portal Are you tired of having to remove your entire screen / Mesh lid? No worries!! Install this and you won’t need to remove again Simply lift up the small cover and you now have access to feed! Printed with PETG filament, which is reef safe. The filament we use...www.reef2reef.com
his orange is pretty glowy under blues. not quite black-light glow, but not far off either
Ya, just need somebody that does them.My Hanna organizer glows bright under tank lights. They also have orange that is florescent
The urchins are only like 1.5” wide and yes it would be on a mesh top.we use the UV reactive filament we stock orange, green and yellow. We can print you the urchin hats just need an estimate on the size you need. Usually a little smaller than the urchin.
The feed door i'd have to design, I'm assuming you want one that fits onto a mesh screen top?
@Reefnoobz90 I remember that one, looking good
Our last atomic order:
TikTok
vm.tiktok.com
Okay, I have some nylon screws and nuts coming in on Monday. I'd like to recess the nut into the bottom frame so I'll start designing on Monday and I'll likely have a model for you the following day.The urchins are only like 1.5” wide and yes it would be on a mesh top.
Definitely, I didn't design those so I'm just going to charge filament cost plus electric to run a printer. If you decided to get the feeding hatch as well the difference is shipping will be cents. Which did you want?Honeycomb. Can you do the hats too
Actually this is the same as the six pack I was looking at.Definitely, I didn't design those so I'm just going to charge filament cost plus electric to run a printer. If you decided to get the feeding hatch as well the difference is shipping will be cents. Which did you want?
As far as I can tell there are:
If you have a different thingiverse link with others let me know.
- a top hat
- a cap
- a French cap
- a crown
- a fairy / magician hat
- a viking hat
I found this one:
Playmo hats by tart2000
A set of 6 hats compatible with Playmobil figurines. You get: a top hat a cap a French cap a crown a fairy / magician hat a viking hatwww.thingiverse.com