ATI Straton LED Light - Comments, Review, PAR, Coverage, Discuss...

I understand, and am still considering the gen 1. I’m not sure that the blues are not needing to turn down for my preference, but that can be addressed later. 10k is bluer than I’m looking for.
Although I prefer a bluer look, with my Straton Pros I'm going with the white schedule in the middle of my photoperiod to hit even higher PAR for a couple of hours. I have to say, I'm enjoying the fish more as they definitely look better in the white light. Not so much the tenuis... But the the non tenuis purples, blues look nice. I'll just look at the teni's during the rest of photoperiod.
 
I understand, and am still considering the gen 1. I’m not sure that the blues are not needing to turn down for my preference, but that can be addressed later. 10k is bluer than I’m looking for.
I believe you know all the generations, but just in case I’ll list them again.

Gen 1 - Straton
Gen 2 - Straton Pro
Gen 3 - Straton Pro 2

Gen 1 and Gen 2 come pretty white - probably 8K-10K color. There are setting for shallow reef pre programmed and it’s quite amber.

This is 50% intensity:
1737152108153.jpeg
 
That doesn’t sound like an improvement to me and would make me less interested in it.
it was done because of customer and corals breeders in Germany that complained that the UV burned their corals , the light also was to white- yellowish and looked same you pee in the water . I had some stratons and sold them because of this, reefi or radion give much nicer colors.
 
it was done because of customer and corals breeders in Germany that complained that the UV burned their corals , the light also was to white- yellowish and looked same you pee in the water . I had some stratons and sold them because of this, reefi or radion give much nicer colors.
There’s still a ton of RB and B LEDs in Pro. Can’t you just dial it in to the color you want by turning down whites or UV’s or whatever
 
it was done because of customer and corals breeders in Germany that complained that the UV burned their corals , the light also was to white- yellowish and looked same you pee in the water . I had some stratons and sold them because of this, reefi or radion give much nicer colors.

I have no doubt that typical customers want something different than I do. I need only look at all the tanks with unnaturally blue high par light to see that.
 
I believe you know all the generations, but just in case I’ll list them again.

Gen 1 - Straton
Gen 2 - Straton Pro
Gen 3 - Straton Pro 2

Gen 1 and Gen 2 come pretty white - probably 8K-10K color. There are setting for shallow reef pre programmed and it’s quite amber.

This is 50% intensity:
1737152108153.jpeg
Thanks, yes. The Straton pro is in my top two. I expect the pro 2 would not be. :)
 
There’s still a ton of RB and B LEDs in Pro. Can’t you just dial it in to the color you want by turning down whites or UV’s or whatever
Yes you can. I run something close to AB+ (Radion Blue’s spectrum) for the second part of my photo period (I run 10-12k for the first half) and I get 400 PAR 9” deep. Whites are basically around 30-40% in this setting. I ramp up and down with whites at 5% for the color pop.

1737169593049.png

1737169816488.jpeg
 
Yes you can. I run something close to AB+ (Radion Blue’s spectrum) for the second part of my photo period (I run 10-12k for the first half) and I get 400 PAR 9” deep. Whites are basically around 30-40% in this setting. I ramp up and down with whites at 5% for the color pop.

1737169593049.png

1737169816488.jpeg
Do you perhaps know if the traton flex is a g2 pro of a g1 pro design?
 
There’s still a ton of RB and B LEDs in Pro. Can’t you just dial it in to the color you want by turning down whites or UV’s or whatever
you can adjust it , but it will never nice as orphek, reefi or radions, and what is the point to have a strong led if most of the leds you can't use it? better spend money in a led that is so you want
 
I have no doubt that typical customers want something different than I do. I need only look at all the tanks with unnaturally blue high par light to see that.
Actually i don't run it very blue as it is common in the US, but I like to have a good pop and good colors even under daylight and I could just never get it same than radion or reefi or bars. my reefi i can set up them white with all colors be nice and not an ugly yellowish same the straton.Some like , i don't
 
Actually i don't run it very blue as it is common in the US, but I like to have a good pop and good colors even under daylight and I could just never get it same than radion or reefi or bars. my reefi i can set up them white with all colors be nice and not an ugly yellowish same the straton.Some like , i don't

Thanks.
 
Thanks, yes. The Straton pro is in my top two. I expect the pro 2 would not be. :)
Are you considering the straton gen1 for your tank? I am currently using the radion xr30 g4 pro but I am thinking of switching. I was thinking of switching to the gen1 but ati released 2 more models, the straton pro and gen2. Doesn't it bother you that the gen1 is an old model?
 
Are you considering the straton gen1 for your tank? I am currently using the radion xr30 g4 pro but I am thinking of switching. I was thinking of switching to the gen1 but ati released 2 more models, the straton pro and gen2. Doesn't it bother you that the gen1 is an old model?

I'm considering the Straton Pro (2 of the 102), which is the currently sold model in the US. Main features for me are good spectrum control, bright, no fan, and would work in my current canopy.

The competition, in my mind, are 4 GHL mitras light bars (3 skywhite or ocean blue, and one coral pop). Same features: good spectrum control, bight, no fan, and fits my canopy.
 
Or quanta pro or reefbreaders
 
I believe you know all the generations, but just in case I’ll list them again.

Gen 1 - Straton
Gen 2 - Straton Pro
Gen 3 - Straton Pro 2

Gen 1 and Gen 2 come pretty white - probably 8K-10K color. There are setting for shallow reef pre programmed and it’s quite amber.

This is 50% intensity:
1737152108153.jpeg
Dang that’s the closest I’ve seen a yellow tang look in an aquarium compared to pics from the wild. So vibrant!
 
I'm considering the Straton Pro (2 of the 102), which is the currently sold model in the US. Main features for me are good spectrum control, bright, no fan, and would work in my current canopy.

The competition, in my mind, are 4 GHL mitras light bars (3 skywhite or ocean blue, and one coral pop). Same features: good spectrum control, bight, no fan, and fits my canopy.
What are the dimensions of the tank?
 
What are the dimensions of the tank?

It's a 120 gallon, 48" x 24" x 24".

It has a glass center brace which gives the Straton's an edge over the light bars from that perspective. .
 
I'm considering the Straton Pro (2 of the 102), which is the currently sold model in the US. Main features for me are good spectrum control, bright, no fan, and would work in my current canopy.

The competition, in my mind, are 4 GHL mitras light bars (3 skywhite or ocean blue, and one coral pop). Same features: good spectrum control, bight, no fan, and fits my canopy.
That’s exactly what I did, 2x 102’s in a canopy for a 120-gallon 48” tank. Coverage is good.
 
120 galonluk, 48" x 24" x 24" boyutlarında.

Straton'un ışık çubuklarına göre bu açıdan bir avantaj sağlayan cam bir merkez desteği vardır.
My tank dimensions are 24"x 20"x 20" I am currently using an xr30 g4 pro I am thinking of changing it because of the fan noise I am thinking of an ati straton pro 102 model and I am planning to make the tank full acro but I am not sure if the lighting will be enough
 
My tank dimensions are 24"x 20"x 20" I am currently using an xr30 g4 pro I am thinking of changing it because of the fan noise I am thinking of an ati straton pro 102 model and I am planning to make the tank full acro but I am not sure if the lighting will be enough

I cannot answer that with any authority as I've never used the light, but my expectation is that it would be plenty bright. I'm hoping and expecting to keep bright light loving organisms.

But I'm sure current users of the Straton Pro would be able to give an answer. :)
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 52 57.8%
  • Automated dosing

    Votes: 6 6.7%
  • Mechanical filtration / roller filter

    Votes: 4 4.4%
  • Automated water testing

    Votes: 3 3.3%
  • Automatic feeding

    Votes: 1 1.1%
  • Lighting schedule

    Votes: 16 17.8%
  • Controller and remote monitoring

    Votes: 3 3.3%
  • Leak detection and emergency shutoff

    Votes: 1 1.1%
  • Automatic water changes

    Votes: 3 3.3%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.1%
Back
Top
Home
Post thread…
Market
What's new