Cloudy water

  • Thread starter Thread starter jazreef
  • Start date Start date
  • Tagged users Tagged users None

jazreef

Active Member
View Badges
Joined
Dec 31, 2023
Messages
159
Reaction score
53
Location
Toronto
Rating - 0%
0   0   0
My 65gallon tank has been a bit cloudy for a little over a week. I had changed the filter media around then so I suspected it could be from that and replaced it with the one I normally use. My tank is about 3/4 months old. It just cleared up from a diatom phase and now is clean. I did a big water change a couple days ago and it still is cloudy. Any suggestions how to fix this or why it may be happening?
 
My 65gallon tank has been a bit cloudy for a little over a week. I had changed the filter media around then so I suspected it could be from that and replaced it with the one I normally use. My tank is about 3/4 months old. It just cleared up from a diatom phase and now is clean. I did a big water change a couple days ago and it still is cloudy. Any suggestions how to fix this or why it may be happening?
Does it look milky?
 
My 65gallon tank has been a bit cloudy for a little over a week. I had changed the filter media around then so I suspected it could be from that and replaced it with the one I normally use. My tank is about 3/4 months old. It just cleared up from a diatom phase and now is clean. I did a big water change a couple of days ago and it still is cloudy. Any suggestions on how to fix this or why it may be happening?
Could you show us a picture so we can get a better understanding of the situation?
 

Attachments

  • image.jpg
    image.jpg
    139.5 KB · Views: 143
Sometime if you dont have enough flow, you can get a bacteria bloom from the stagnant water, but you said you have power heads so I am not sure. Are you dosing with anything? Do you have a filtration system?
 
Sometime if you dont have enough flow, you can get a bacteria bloom from the stagnant water, but you said you have power heads so I am not sure. Are you dosing with anything? Do you have a filtration system?
I think my flow is good I have 2 power heads in a 65g. When I do water changes I usually dose with life nitrifying Bacteria (could it be this?), prime, and water conditioner. I have a filtration system but no additional systems.
 
Sometime if you dont have enough flow, you can get a bacteria bloom from the stagnant water, but you said you have power heads so I am not sure. Are you dosing with anything? Do you have a filtration system?
I just was doing some research, it says activated char plate
 
Sorry, activated charcoal can help this. I had got a new activated charcoal and I believe this happened shortly after. Could this maybe be it ?
 
I think my flow is good I have 2 power heads in a 65g. When I do water changes I usually dose with life nitrifying Bacteria (could it be this?), prime, and water conditioner. I have a filtration system but no additional systems.
Sometime when adding beneficial bacteria the water becomes cloudy because of a imbalance between bacteria and waste. Cloudy water equals more waste/ammonia than bacteria. I would check ammonia levels and nitride levels ASAP.
 
Sometime when adding beneficial bacteria the water becomes cloudy because of an imbalance between bacteria and waste. Cloudy water equals more waste/ammonia than bacteria. I would check ammonia levels and nitride levels ASAP.
Ok I am going to test the water now.
 
Sorry, activated charcoal can help this. I had got a new activated charcoal and I believe this happened shortly after. Could this maybe be it it.

Sorry, activated charcoal can help this. I had got a new activated charcoal and I believe this happened shortly after. Could this maybe be it ?
This could be it, but usually activated charcoal has the opposite effect, xlearing up the water. Maybe something got mixed in with the charcoal packet causing this? I am not to sure though.
 
Sometime when adding beneficial bacteria the water becomes cloudy because of a imbalance between bacteria and waste. Cloudy water equals more waste/ammonia than bacteria. I would check ammonia levels and nitride levels ASAP.
After doing the water test these are the levels:
pH: 8
Ammonia: 0.2
Nitrite: 0
Nitrate: 5.0

Are these levels bad ?
 
Ok I am going to test the water now.
T
After doing the water test these are the levels:
pH: 8
Ammonia: 0.2
Nitrite: 0
Nitrate: 5.0

Are these levels bad ?
Ph is good.
Ammonia is bad, can be harming your fish.
Nitrate is good.
Nitrate is good.
 
After doing the water test these are the levels:
pH: 8
Ammonia: 0.2
Nitrite: 0
Nitrate: 5.0

Are these levels bad ?
I would try to get ammonia down ASAP. Might clear up your water, but the ammonia is dangerous for your fish.
 

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 34 54.0%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 29 46.0%
Back
Top
Home
Post thread…
Market
What's new