Cloudy water

  • Thread starter Thread starter Matthias7
  • Start date Start date
  • Tagged users Tagged users None

Matthias7

Active Member
View Badges
Joined
Apr 26, 2014
Messages
446
Reaction score
147
Location
Las cruces, nm
Rating - 0%
0   0   0
my tank water seems to be clouding a little bit. It has been crystal clear up until about 2 weeks ago. I had an alk issue (dosing tubing clogged unbeknownst to me) alk dropped to 6 causing some monti's to rtn and 1 acro colony. My euphyllia are not looking as good as they have in the past although I'm probably the only one that can tell. So any thoughts to the cloudiness of the water. The alk has been corrected (slowly over 5 days) now running 8.4 again. I added carbon 3 days ago in a bag in the sump. i also run GFO in a reactor.
 
my tank water seems to be clouding a little bit. It has been crystal clear up until about 2 weeks ago. I had an alk issue (dosing tubing clogged unbeknownst to me) alk dropped to 6 causing some monti's to rtn and 1 acro colony. My euphyllia are not looking as good as they have in the past although I'm probably the only one that can tell. So any thoughts to the cloudiness of the water. The alk has been corrected (slowly over 5 days) now running 8.4 again. I added carbon 3 days ago in a bag in the sump. i also run GFO in a reactor.
Did you do a water change? Anytime things go out of wack a nice water change always seems to help me.
 
Hows your ph? I believe if Alk and ph drop co2 can raise which can increase a bacterial bloom.. maybe a big water change will help.
 
My current is 8.0 (roughly I only have an Api ph kit and the color is in between the 8.0 and 8.2 reading)
 
Thx for the replies bmw. I am shutting down the gfo to see if that maybe causing the issue
 
my tank water seems to be clouding a little bit. It has been crystal clear up until about 2 weeks ago. I had an alk issue (dosing tubing clogged unbeknownst to me) alk dropped to 6 causing some monti's to rtn and 1 acro colony. My euphyllia are not looking as good as they have in the past although I'm probably the only one that can tell. So any thoughts to the cloudiness of the water. The alk has been corrected (slowly over 5 days) now running 8.4 again. I added carbon 3 days ago in a bag in the sump. i also run GFO in a reactor.
How did you adjust your alk? More details would help maybe.
 
I have a dosing pump I basically dose about 60ml of alk daily spread over 20 doses in a 24 hour period. I just increased the dose slightly to raise my level back to normal. I really think the alk swing caused the cloudiness unsure what the chemistry would be that cause the issue
 
If you dose calcium too doing that at the same time or even too close together can cause the calcium to precipitate and that will cloud the water. Is this possibly what happened?
 
It is possible I can look to make sure I have the dosers time offset between the 2. I do dose them into separate areas of the sump
 
Based on the info, calcium precipitation is the most likely cause. It should not take too long to clear up. If you have a very fine filter sock (100 micron) that might speed things along a little. But more than likely you'll just need to wait until it re-dissolves... Doubt that stopping the GFO will help
 

TOP 10 Trending Threads

WHEN PLANNING CORAL PLACEMENT, WHAT USUALLY WINS? THE FUTURE COLONY, OR THE NEXT FRAG?

  • I leave plenty of open space for large future colonies

    Votes: 1 14.3%
  • I plan for growth...but occasionally squeeze coral into tight spaces

    Votes: 4 57.1%
  • I try to balance future growth with variety now

    Votes: 2 28.6%
  • I fit in as many frags as I reasonably can

    Votes: 1 14.3%
  • One more frag always wins! Future me can solve the problem...

    Votes: 0 0.0%
  • It depends on the coral and how quickly it grows

    Votes: 1 14.3%
  • I squeeze 'em in! Survival of the fittest, baby!!

    Votes: 0 0.0%
  • I’m already out of room, so apparently we know my answer...

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new