DIY Led reef lighting

[AshwinRavi]

Has anyone owned a Rapid LED kit ( http://www.rapidled.com/solderless-75g-tank-dimmable-kit/ )
as shown in this picture below, I am curious to know if anyone has PAR measurements for this DIY kit and their experience in owning it.

 

[jrwoltman]

I have a retrofitted Rapid LED biocube. I can't speak to the PAR readings, but I am very happy with it. It is strong enough to grow SPS very well.

 

[AshwinRavi]

I have a retrofitted Rapid LED biocube. I can't speak to the PAR readings, but I am very happy with it. It is strong enough to grow SPS very well.

nice to know, could you share picture if you don't mind..

 

[jrwoltman]

It is solderless and I added a 1 LED moonlight this is not pictured.

 

[AshwinRavi]

It is solderless and I added a 1 LED moonlight this is not pictured.

thanks

 

[Fishinbob]

nice to know, could you share picture if you don't mind..

Hey ashwin,

I've used several rapidled.com kits, I built then rebuilt my fixture for my 90 gallon started with 2 fixtures with 40 leds each in a linear pattern, mostly cw and rb with a few uv, green,red and blue. Here is my current setup designed like a radion-esque puck.
Channel 1: Cool white, Neutral white ,
Channel 2: Lime, Green, Warm white, red
Channel 3: blue, cyan
Channel 4: Royal blue,
Channel 5: uv 420, viloet,
Oriniginaly controlled by petentiometers now through apex.
Run rb at 55%
Uv at 50%
Blue 40%
Colors 35%
Whites 25%
I also run 2 4' t5 ho for extra light/color
More than enough light at where in the tank and adjustable color rendition to your pleasing. If you have any other questions feel free to ask!

We also used a rapid aurora puck for my gf's biocube which worked wonderfully! Still a bit too bright at 50%. Rapid led is a great company with good customer service and support, had my diy led fixtures for over 5 years and everything's going strong just make sure you clean and keep cool and it will last a long time!

Has anyone owned a Rapid LED kit ( http://www.rapidled.com/solderless-75g-tank-dimmable-kit/ )
as shown in this picture below, I am curious to know if anyone has PAR measurements for this DIY kit and their experience in owning it.

 

[AshwinRavi]

thank you so much!! awesome detailed explanation.. appreciate it.