Emergency: Derasa Clam Detached Hinge

Just to add a datapoint: My Derasa's hinge detached 6 months ago and I did the frag plug/rubber band procedure and he's still alive and seemingly happy. I've had to replace the rubberbands 2 or 3 times. They degrade and break eventually and the clam gets lopsided again and a new band fixes it. Rubberband does need to be fairly tight.
Do you mind sharing a picture where you attached the plugs and bands?
 
Well, the clam is able to open and close now and the halfs are staying aligned, but.. he isn’t near as full. Hoping for a recovery.

Is it time for a fresh water dip or will that just cause more stress?
 

Attachments

  • IMG_4786.jpeg
    IMG_4786.jpeg
    184.2 KB · Views: 25
Well, the clam is able to open and close now and the halfs are staying aligned, but.. he isn’t near as full. Hoping for a recovery.

Is it time for a fresh water dip or will that just cause more stress?

Usually if the tissue is that far receded in to the shell it’s not good. Monitor closely if it gets worse it may be too late.
 
Well, the clam is able to open and close now and the halfs are staying aligned, but.. he isn’t near as full. Hoping for a recovery.

Is it time for a fresh water dip or will that just cause more stress?
FW dip is only for treating PMD, which isn’t the issue here, so there’s absolutely no reason to do it. I know people will dip new clams as a precaution, but if the clam is stressed or in poor condition, there’s no reason for it.
 
FW dip is only for treating PMD, which isn’t the issue here, so there’s absolutely no reason to do it. I know people will dip new clams as a precaution, but if the clam is stressed or in poor condition, there’s no reason for it.
That’s what I figured. No pinched mantle..

Time to see if it’ll recover on its own. The clam seems to be opening and closing quite well now, staying aligned.
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 9 27.3%
  • Heating or cooling

    Votes: 1 3.0%
  • Auto top-off

    Votes: 3 9.1%
  • Return pump or water circulation

    Votes: 3 9.1%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 5 15.2%
  • Tank sitter or remote monitoring

    Votes: 1 3.0%
  • Electrical failure of some sort

    Votes: 0 0.0%
  • Seam or structure failure

    Votes: 8 24.2%
  • Something else (tell us in the comments)

    Votes: 3 9.1%
Back
Top
Home
Post thread…
Market
What's new