Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Has anyone been able to find a reasonably priced source for the water filters that go at the end of the tube on Alkatronic and mastertronic?
Do you happen to have some links for these items your using? For example can't find this particular filter they look different now and have metal in them?I bought a dozen of these for $10.
Do you happen to have some links for these items your using? For example can't find this particular filter they look different now and have metal in them?
On AliExpress you can buy silicone septa with a PTFE layer on one side. They are 3 x 22mm.So I ended up using the silicone baking sheet and the round cutting die for the vial septa caps. The only thing I noticed is some of the reagents eat the silicone. So I got some thin PTFE and had some luck gluing the two together using either plain silicone or using Heptane based activator and superglue. The down side with the superglue is it sticks almost immediately.
Someone on Facebook says it is 3/5mm.Anyone know sizes for Alkatronic pump B/D inner tubing?
I can see it is Kamoer PharMed but it is not marked with dimensions.
Someone on Facebook says it is 3/5mm.
I’ve been using HCl for several years. Here’s my recipe to make 5 liters. I buy mine on Amazon.where to get the IM HCL and what is the recipe to mix this?
Thank you sir, I was going back in this thread to check if anyone found mastertronic syringes replacements? do you know if anyone found good source?I’ve been using HCl for several years. Here’s my recipe to make 5 liters. I buy mine on Amazon.
To make 5L of alkatronic reagent
100 ml 1M HCl plus 4900 ml water
Instructions:
- Fill a 100 ml volumetric flask with 1M acid
- Put the acid in a 1L volumetric flask and fill to 1L with RO water
- Add the solution to the alkatronic feed container.
- Add 4 more L RO water to container.