Looking to download MyReef 2.0? Look no further!

[Nanoreefwannabe]

I would love to know how to configure my net mod so as to get notifications through email...I can't for the life of me figure it out...

 

[markfmvl]

I am ready to help with programming and other issues. I was a team DA member.

Is there a way to access the unit through the net module without buying domain or subscriptions?

 

[markfmvl]

I am ready to help with programming and other issues. I was a team DA member.

Is there a way to access the net module without buying a subscription?

 

[markfmvl]

Can I access the net module without buying a subscription?

 

[n2585722]

Can I access the net module without buying a subscription?

I got a Asus router that came with free ddns service. If you know the IP address you can get in but that can change unless you have a static IP. The static IP would most likely be more expensive than a ddns service. Hope this helps.

 

[pjb9166]

Can you post the programming for channel 1?

Sorry I have no idea how to do that? Or maybe not sure what you are asking. I went into settings and Named Chanel 1 as Pumps. Had it set to default on and I setup the option to disable the chanel for 25 min for feeding.
Like I had posted the led is lit saying that the plug is active. But there is no voltage coming from the plug. All three other plugs have voltage when I read with my digital multi meter.

 

[n2585722]

If the channel 1 LED is lit but you have no power it sounds like the most likely cause is a bad relay for that channel. CH1 and CH4 use relays and CH2 and CH3 use triacs.

Below is an example of programming for a specific task. This task cycles a mister and fogger. it has programming for three outputs. These could be any outputs on any of the power bars. This is a rather lengthy example but it was the only one I could find quickly.

; Fogger output

Function ...... multi-timer
Timer ......... 1
Timer ......... None
Default ....... Off
Standby ....... ----
Mode .......... 0
Alarm ......... None
Mode .......... OFF

; Mister output

Function ...... Multi-Timer
Timer ......... 2
Timer ......... None
Default ....... Off
Standby ....... ----
Mode .......... 0
Alarm ......... None
Mode .......... OFF

; Unused or virtual output

Function ...... Multi-Timer
Timer ......... 11
Timer ......... None
Timer ......... None
Timer ......... None
Default ....... Off
Standby ....... ----
Mode .......... 0000
Alarm ......... 11
Mode .......... OFF

Timer 1
DOW ............ SMTWTFS
Start ............. 00:12:00AM
Time On ....... 00:03:00
Time Off ....... 00:57:00
Repeat .......... No
Random ........ No
Oscillate ........ No

Timer 2
DOW ........... SMTWTFS
Start ............ 12:00:00PM
Time On ...... 00:00:15
Time Off ...... 05:00:00
Repeat ......... No
Random ....... No
Oscillate ....... Yes

Alarm 2 ................. ; Alarm used to turn on mixer channel when mister is on

Device ......... 10:OUT2 ... ; Change appropriately for your systems mister output
Trip .............. On
Alert ............. ---

 

[ObiQuiet]

Hi, does there exist an RKE firmware file from before they removed graphing from the head unit? This would be earlier than 2.02.

 

[crny1]

If anyone is looking for a complete RKE V2 PM me. I have bailed out of the DA scene and jumping aboard the Apex wagon.

 

[Crabs McJones]

If anyone is looking for a complete RKE V2 PM me. I have bailed out of the DA scene and jumping aboard the Apex wagon.

Lol me too!

 

[n2585722]

You will loose a lot of functions and ability to use newer modules.

Hi, does there exist an RKE firmware file from before they removed graphing from the head unit? This would be earlier than 2.02.

 

[ObiQuiet]

You will loose a lot of functions and ability to use newer modules.

Hi Danny, I'd be happy with the functions in this version of the manual: https://www.aquacave.com/Manuals/DA-RKE_User_Guide.pdf Graphing and multiple Standby modes would be great.

 

[n2585722]

Hi Danny, I'd be happy with the functions in this version of the manual: https://www.aquacave.com/Manuals/DA-RKE_User_Guide.pdf Graphing and multiple Standby modes would be great.

Do you use any of the newer modules such as SLX,DP1 or PB4? Also it may be a 1.XX version of firmware. This would require the old program for updating firmware to install it. It would also require 1.XX firmware for all the modules. myReef is not compatible with the 1.XX firmware. I don't think I have either the 1.XX firmware or the old program software anymore.

 

[Mark Lawson]

Wow this is great as I just got my hands on a unopened reefkeeper Lite with all listed below. Going to use on my 26 gal ...... so will have some questions am sure......Thx
Package contents:

• 1 x RKL Head Unit
• 1 x PC4 - Power Controller 4
• 1 x SLX (pH, pH/ORP, temp, and 2 x switch inputs)
• 1 x Digital Aquatics iTemp Temperature Probe
• 1 x (FREE) DA pH probe
• 1 x SID - System Interface Device
• 1 x Programming Coupler
• 6 x Mounting screws

ReefKeeper Lite Preliminary Product Information

• Expandable - up to 4 modules!
• pH, ORP, and switch inputs (w/ optional SLX)
• 16 timers / 16 alarms
• Audible / Visual alarms
• Wavemaker
• Dual Stage Temperature Controller
• Moonlight Controller (w/optional MLC)
• Light Controller
• Pump Controller

 

[n2585722]

Hi Danny, I'd be happy with the functions in this version of the manual: https://www.aquacave.com/Manuals/DA-RKE_User_Guide.pdf Graphing and multiple Standby modes would be great.

As far as I go back is version 2.06.

 

[n2585722]

Wow this is great as I just got my hands on a unopened reefkeeper Lite with all listed below. Going to use on my 26 gal ...... so will have some questions am sure......Thx
Package contents:

• 1 x RKL Head Unit
• 1 x PC4 - Power Controller 4
• 1 x SLX (pH, pH/ORP, temp, and 2 x switch inputs)
• 1 x Digital Aquatics iTemp Temperature Probe
• 1 x (FREE) DA pH probe
• 1 x SID - System Interface Device
• 1 x Programming Coupler
• 6 x Mounting screws

ReefKeeper Lite Preliminary Product Information

• Expandable - up to 4 modules!
• pH, ORP, and switch inputs (w/ optional SLX)
• 16 timers / 16 alarms
• Audible / Visual alarms
• Wavemaker
• Dual Stage Temperature Controller
• Moonlight Controller (w/optional MLC)
• Light Controller
• Pump Controller

Sounds good.

 

[ry@n]

I stored my unit when I broke down my tank a few years back. I recently set up a new tank and wanted to use my old reef keeper unit, but I discovered the liquid I had my probes in had dried out. Any advice on how I can revive the ph and temp probes or compatible probes I can purchase. Seems like no one carries probes for reefkeepers anymore. Thanks in advance

 

[Crabs McJones]

I stored my unit when I broke down my tank a few years back. I recently set up a new tank and wanted to use my old reef keeper unit, but I discovered the liquid I had my probes in had dried out. Any advice on how I can revive the ph and temp probes or compatible probes I can purchase. Seems like no one carries probes for reefkeepers anymore. Thanks in advance

Welcome to R2R @ry@n
Check out this thread here, it should help answer your question
https://www.reef2reef.com/threads/alternatives-to-digital-aquatics-probes-and-parts.439573/

 

[ry@n]

Welcome to R2R @ry@n
Check out this thread here, it should help answer your question
https://www.reef2reef.com/threads/alternatives-to-digital-aquatics-probes-and-parts.439573/

Thank you!

 

[n2585722]

The temp probe should not matter if it is dry. The pH may be an issue though. A Pinpoint pH probe will work.