reef-pi :: An opensource reef tank controller based on Raspberry Pi.

[GaryE]

Im starting to get annoyed by Adafruit IO.

I have these autopopulated feeds, but no data.

reefpiblue light-channel-1
reefpicabinet light-channel-1
reefpifan-channel-1
reefpiinternal box temp 2-reading
reefpiinternal box temp-reading
reefpisump temp-reading
reefpitank temp-heater
reefpitank temp-reading
reefpiunused-channel-1
reefpiwhite bar front-channel-1

The only one that provides data is the reefpifan-channel-1.

Plenty of errors in the log though.. Anyway do debug this or am I better off just turning off telemetry??


{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:53
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

 

[Dave's Reef]

So I am putting the final touches on my build trying to setup dimming and keep getting an error while trying to add the pca9685 board to the driver list

 

[Schreiber]

So I am putting the final touches on my build trying to setup dimming and keep getting an error while trying to add the pca9685 board to the driver list

Can you post a picture of your driver configuration screen?

 

[Ranjib]

Im starting to get annoyed by Adafruit IO.

I have these autopopulated feeds, but no data.

reefpiblue light-channel-1
reefpicabinet light-channel-1
reefpifan-channel-1
reefpiinternal box temp 2-reading
reefpiinternal box temp-reading
reefpisump temp-reading
reefpitank temp-heater
reefpitank temp-reading
reefpiunused-channel-1
reefpiwhite bar front-channel-1

The only one that provides data is the reefpifan-channel-1.

Plenty of errors in the log though.. Anyway do debug this or am I better off just turning off telemetry??


{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:53
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Free account has limit on how much data you can send. Check for naming convention. Use no space in the names

 

[Ranjib]

Can you post a picture of your driver configuration screen?

Yup. Check i2c address , it should be 64, decimal equivalent of 0x40

 

[GaryE]

Free account has limit on how much data you can send. Check for naming convention. Use no space in the names

I limit my temp sensors to check every 180 seconds,.

Here's my config (of course without the key)

not really a lot on here that I can screw up. I have cleared my IO feeds several times, how might I debug this?

 

[Dave's Reef]

Can you post a picture of your driver configuration screen?

I just got it to work I thought the address was 40 but used 64 and it worked thanks

 

[drbogger]

@Ranjib would it be a good idea to put a little note next to the address text box that the address needs to be in Decimal format?

 

[Ranjib]

@Ranjib would it be a good idea to put a little note next to the address text box that the address needs to be in Decimal format?

Yes.. across the board we should provide such tooltip/helper text.

 

[Ranjib]

I limit my temp sensors to check every 180 seconds,.

Here's my config (of course without the key)

not really a lot on here that I can screw up. I have cleared my IO feeds several times, how might I debug this?

Adafruit has limit on 10 feeds thats one starting point.. next step will be to cross check which data are being sent across and which ones are being dropped. then focus on them and check if the feed is absent or the datapoint. We should do a better job making this easier by adding more logging.. i'll work on that.

 

[Ranjib]

If I go back and test the original ATO the same way, it doesn't alert or Disable

For posterity: https://github.com/reef-pi/reef-pi/issues/1104

 

[Ranjib]

Im starting to get annoyed by Adafruit IO.

I have these autopopulated feeds, but no data.

reefpiblue light-channel-1
reefpicabinet light-channel-1
reefpifan-channel-1
reefpiinternal box temp 2-reading
reefpiinternal box temp-reading
reefpisump temp-reading
reefpitank temp-heater
reefpitank temp-reading
reefpiunused-channel-1
reefpiwhite bar front-channel-1

The only one that provides data is the reefpifan-channel-1.

Plenty of errors in the log though.. Anyway do debug this or am I better off just turning off telemetry??


{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:35:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - API documentation can be found at https://io.adafruit.com/api/docs"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:24
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:23
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:54
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

Apr 5 11:36:53
{"error":"not found - that is an invalid URL, please check the API documentation at https://io.adafruit.com/api/docs to make sure your URL is correct"}

This has been a recurring issue. We cant fix the underlying rate limiter issue, but we can make it more easily understandable. We can most likely mitigate the feedname issue entirely on reef-pi side. I'll make sure we have addressed this before 4.0

[Request] Make adafruit io error troubleshooting easier · Issue #1105 · reef-pi/reef-pi

Adafruit IO has limits on the number of feeds and the rate of data submission. Currently, feed name and total number of sensors can very easily lead users to adafruit io error conditions. Update ui...

github.com

 

[GaryE]

Adafruit has limit on 10 feeds thats one starting point.. next step will be to cross check which data are being sent across and which ones are being dropped. then focus on them and check if the feed is absent or the datapoint. We should do a better job making this easier by adding more logging.. i'll work on that.

That's easy, no data is getting to IO. I don't know why.

 

[GaryE]

This has been a recurring issue. We cant fix the underlying rate limiter issue, but we can make it more easily understandable. We can most likely mitigate the feedname issue entirely on reef-pi side. I'll make sure we have addressed this before 4.0

[Request] Make adafruit io error troubleshooting easier · Issue #1105 · reef-pi/reef-pi

Adafruit IO has limits on the number of feeds and the rate of data submission. Currently, feed name and total number of sensors can very easily lead users to adafruit io error conditions. Update ui...

github.com

If I could see the current light level on the reefpi dashboard, io wouldn't be needed.

 

[Ranjib]

If I could see the current light level on the reefpi dashboard, io wouldn't be needed.

Which profile you are using? This should be doable in reef-pi. I think this is already planned for 4.0 (support for charts for some of the new profiles)

 

[GaryE]

Which profile you are using? This should be doable in reef-pi. I think this is already planned for 4.0 (support for charts for some of the new profiles)

All 3 lights set with diunral.

 

[GaryE]

Which profile you are using? This should be doable in reef-pi. I think this is already planned for 4.0 (support for charts for some of the new profiles)

When I click on Lights in the dashboard config, it reverts to Health.

I have tried on a fresh install on a new pi install, same issue.

When this happens, no graph at all shows on the dashboard.

 

[Ranjib]

When I click on Lights in the dashboard config, it reverts to Health.

I have tried on a fresh install on a new pi install, same issue.

When this happens, no graph at all shows on the dashboard.

That’s what I meant, only interval profile has chart support right now, rest are still needs chart support

 

[GaryE]

That’s what I meant, only interval profile has chart support right now, rest are still needs chart support

My blue channel is on Interval, no chart for it...

 

[GaryE]

Here's a short clip showing what I am seeing.