Rob's Really Rad 180 Reef Rally

Getting my fuge ready to go and hopefully up and running with some chaeto this weekend. What does everyone think about sand in a refugium? I have just enough left to put about an 1 1/2 on the bottom of the area in my sump. Do it, screw it? Let me know!
PXL_20210211_212622499.jpg
 
Minor upgrades to my mixing station today. Added an inkbird to control the heater as well as an American Marine Pinpoint salinity monitor. I found they had a DC plug in adaptor so I don't have to run it off the 9v battery which is far more useful. Definitely a nice to have when you're going thru TTM and want to make sure you're on point when doing the frequent water changes it requires.

PXL_20210214_172246342.jpg


PXL_20210214_172229634.jpg
 
So this is a good trend so far. Top pic was on 2/11 bottom ones is from today. The phyto culture is on the left, pods right in both shots. The green is fading to the right, evidence of pods consuming their phyto that was added at the start. Phyto culture in the left is far more noticeably darker green which tells me the culture is growing well. Theoretically these should be able to be split and started all over again in a couple days. We shall see.

I swear I didn't switch these around lol
PXL_20210212_020914929.jpg

PXL_20210216_174428538.NIGHT.jpg
 
So this is a good trend so far. Top pic was on 2/11 bottom ones is from today. The phyto culture is on the left, pods right in both shots. The green is fading to the right, evidence of pods consuming their phyto that was added at the start. Phyto culture in the left is far more noticeably darker green which tells me the culture is growing well. Theoretically these should be able to be split and started all over again in a couple days. We shall see.

I swear I didn't switch these around lol
PXL_20210212_020914929.jpg

PXL_20210216_174428538.NIGHT.jpg
Sweet!
 
Big 'ol jug of soda lime lol. See how long this stuff lasts. Doing some longevity testing now on my CO2 scrubber. Between that, getting my fuge going and adding fresh outside air with dosing kalk I been running 8.1-8.3 pH the last few days! Huge improvement over the 7.8-8 if I was lucky before.
PXL_20210217_212345691.NIGHT.jpg
 
The phyto efforts were a huge success in my mind! looked like a good culture, had enough to bottle, restart the next one as well as the pods. The pods didn't go all that well I think. Due to the extreme cold I think they took a pretty hard hit during shipment. There wasn't a lot of activity after i got them and while i could see live pods (barely, those buggers are small!) it just didn't seem to be a thriving number so instead of splitting them I put everything back in and rebooted that batch with new phyto and we'll see how it goes. I think because their numbers were so depleted they just need more time. But there were viable pods and they did seem to eat the phyto that was in the jar as it was quite clear in color. Hopefully this next round gets me there.

pouches filled (I intend to reuse these)
1613744640447.png


Sealer
1613744639762.png


All done!
1613744670339.png


Also, sent in my first ICP test yesterday!
1613744715515.png
 

Attachments

  • 1613744570568.png
    1613744570568.png
    1.1 MB · Views: 121
Nice build there you have here. I'm in the middle of building my 270g and I'm still trying to decide on the sump. I had looked at the Bashea sumps, but their return section was supper tiny due to have they set those up. I did not know that they did custom designs. I'm actually looking to do something very similar to what you have done. Roller mat instead of socks and dual return pumps.
 
The phyto efforts were a huge success in my mind! looked like a good culture, had enough to bottle, restart the next one as well as the pods. The pods didn't go all that well I think. Due to the extreme cold I think they took a pretty hard hit during shipment. There wasn't a lot of activity after i got them and while i could see live pods (barely, those buggers are small!) it just didn't seem to be a thriving number so instead of splitting them I put everything back in and rebooted that batch with new phyto and we'll see how it goes. I think because their numbers were so depleted they just need more time. But there were viable pods and they did seem to eat the phyto that was in the jar as it was quite clear in color. Hopefully this next round gets me there.

pouches filled (I intend to reuse these)
1613744640447.png


Sealer
1613744639762.png


All done!
1613744670339.png


Also, sent in my first ICP test yesterday!
1613744715515.png
Did those pouches and that sealer come with the Poseidon phytotank set?
 
First successful pod harvest. These were Tisbe pods. Being that I have to travel soon I didn't want to split the batch and start a new one. Also want to do some more homework on which type is best for my tank. When I get back I'll get another batch of whatever from algae barn and start them up again. Using the spare tank for an additional batch of phyto now. I can run one more after this before I have to hit the road. I can restart the phyto from what I have stored in the refrigerator. Need to find some larger storage containers I think.

Harvest:
 

TOP 10 Trending Threads

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 17 33.3%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 6 11.8%
  • It depends on whether my nutrient export can handle it

    Votes: 8 15.7%
  • It depends on how badly I want the fish

    Votes: 11 21.6%
  • Not much. I’m willing to adjust my routine

    Votes: 9 17.6%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 8 15.7%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 2 3.9%
  • I haven’t really considered this before

    Votes: 4 7.8%
  • Something else (see my comments in the thread)

    Votes: 1 2.0%
Back
Top
Home
Post thread…
Market
What's new