VorTech MP10 speed

  • Thread starter Thread starter zbrusko
  • Start date Start date
  • Tagged users Tagged users None

zbrusko

Active Member
View Badges
Joined
Mar 14, 2023
Messages
465
Reaction score
248
Location
CT
What state or country do you live in
Connecticut
Rating - 0%
0   0   0
Hi,

I have a VorTech MP10mQD wavemaker. I have been experimenting with a schedule, and decided to set it to a low constant speed overnight (not sure if this is good or bad long term, but I have no corals yet). Despite setting it at 1% it seems to run at about 25%. Is the actual lowest setting really 25% in practice, or am I missing something?

Thanks.
 
I've found that the speed doesn't seem linear. There is a minimum speed it can run and that's the 1% and that's not 1% of the 100% setting.
 
This was a great thread to stumble upon, I was debating on buying an MP10 for my 3 gallon Pico tank, if the power percentage is not linear then this pump is going to be way overpowered for my tank. Thank you for posting!
 
This was a great thread to stumble upon, I was debating on buying an MP10 for my 3 gallon Pico tank, if the power percentage is not linear then this pump is going to be way overpowered for my tank. Thank you for posting!
Yeah, I can’t really get it below 450 gph.
 
Yeah, I can’t really get it below 450 gph.
I would definitely have water flowing over the side of my tank if I installed that pump. I wish they made a smaller version, I’m using the smallest hydor pump but there is zero control. The Nero 3 is way overpowered for my tank as well.
 
I would definitely have water flowing over the side of my tank if I installed that pump. I wish they made a smaller version, I’m using the smallest hydor pump but there is zero control. The Nero 3 is way overpowered for my tank as well.
Have you tried a sicce syncra nano pump? It may be too clunky in a 3g but I use it to mix salt in a 5g bucket. It is 110 gph.
 

TOP 10 Trending Threads

WHICH TYPE OF MISTAKE TAUGHT YOU YOUR MOST EXPENSIVE REEFKEEPING LESSON?

  • Moving too quickly or adding too much at once

    Votes: 7 35.0%
  • Skipping—or shortening—quarantine or dipping

    Votes: 5 25.0%
  • Buying the wrong equipment the first time

    Votes: 4 20.0%
  • Ignoring maintenance, warning signs, or redundancy

    Votes: 6 30.0%
  • Chasing numbers or making too many changes

    Votes: 3 15.0%
  • Choosing incompatible fish, corals, or invertebrates

    Votes: 3 15.0%
  • Poor aquascaping or tank-design decisions

    Votes: 1 5.0%
  • Failing to research an animal’s needs

    Votes: 1 5.0%
  • Trusting bad advice

    Votes: 3 15.0%
  • Doing something on the tank when you should've gone to bed

    Votes: 4 20.0%
  • Something else—tell us below

    Votes: 4 20.0%
  • I’m still waiting for my first expensive lesson!

    Votes: 2 10.0%
Back
Top
Home
Post thread…
Market
What's new