Anyone using Dr. Sochting's Oxydator

[atoll]

atoll, Thanks for sharing and guidance. Will be sharing my experience when I have it running and will continue browsing through this thread. Hope someone in HK stocks this or Amazon it is .

If not try here as apparently postage isn't so bad.

Söchting Oxydator A

www.aquaristikshop.com

 

[JWsticks]

If not try here as apparently postage isn't so bad.

Söchting Oxydator A

www.aquaristikshop.com

Definitely getting one. Was just looking at this site too. TY

 

[Nath514]

Very interested in trying an Oxydator out on my reef tank. I have a Fiji Cube 32 EXT with the sump probably looking at 30 gallons of water ( lots of rock ). I would like to minimize how often I need to refill and take advantage of the better lid the model A has. Can someone help me understand if an A with a single catalyst would work for 30 gallons and what would be the ideal concentration of H2O2.

Thanks,
Nathan

 

[jhuntstl]

Very interested in trying an Oxydator out on my reef tank. I have a Fiji Cube 32 EXT with the sump probably looking at 30 gallons of water ( lots of rock ). I would like to minimize how often I need to refill and take advantage of the better lid the model A has. Can someone help me understand if an A with a single catalyst would work for 30 gallons and what would be the ideal concentration of H2O2.

Thanks,
Nathan

Pulled this from it's description.

aquariums: 100-200 L, 1 catalyst, solution: 6%, operating time: 40 days, O2/day: 270 mg
aquariums: 100-200 L, 2 catalysts, solution: 6%, operating time: 20 days, O2/day: 540 mg

aquariums: 200-400 L, 2 catalysts, solution: 6%, operating time: 20 days, O2/day: 540 mg
aquariums: 200-400 L, 1 catalyst, solution: 12%, operating time: 20 days, O2/day: 1080 mg

aquariums: 400-800 L, 2 catalysts, solution: 12%, operating time: 10 days, O2/day: 2160 mg

I'm using a D model and never considered the A as a means to reduce maintenance. I dilute 12% down to about 7% and use a single catalyst. This will last me about 2 weeks.

 

[najer]

Just my opinion as I can't back this up with orp readings, that is a big chunk of oxydator in that water volume, I would go one catalyst and 3 - 6 percent peroxide to start, watch nems and corals for adverse reactions.

 

[atoll]

Pulled this from it's description.

I'm using a D model and never considered the A as a means to reduce maintenance. I dilute 12% down to about 7% and use a single catalyst. This will last me about 2 weeks.

6% with 1 catalyst should be fine.

 

[jhuntstl]

6% with 1 catalyst should be fine.

I agree. This would be a good place to start @Nath514. Maybe even the 3% if you want to be safe. I'll be curious to know how long you can go between refills with the model A. Please update if you go this route!

I bumped mine to 7% on the D because it better aligned with my maintenance schedule. The extra % bought me a little more time, so I wouldn't run dry before water change day.

 

[Nath514]

I agree. This would be a good place to start @Nath514. Maybe even the 3% if you want to be safe. I'll be curious to know how long you can go between refills with the model A. Please update if you go this route!

I bumped mine to 7% on the D because it better aligned with my maintenance schedule. The extra % bought me a little more time, so I wouldn't run dry before water change day.

Thanks for all the responses. The next problem is it doesn't seem like there is anywhere to get a size A right now in the US. If anyone knows a US seller that is in stock please let me know.

 

[Nath514]

Received my model A yesterday and dilluted some 18% H2O2 down to 6%. Using one catalyst for now and will be monitoring my corals. Right now after over a year of no algae and good stability I have a massive hair algae outbreak so hopefully this can be part of the solution.

 

[atoll]

Received my model A yesterday and dilluted some 18% H2O2 down to 6%. Using one catalyst for now and will be monitoring my corals. Right now after over a year of no algae and good stability I have a massive hair algae outbreak so hopefully this can be part of the solution.

Do bare in mind it's as you say only part.

 

[Nath514]

Do bare in mind it's as you say only part.

Yep, I think the initial outbreak was from extra light from a window that had been closed in the past. Now I am doing daily manual removal, dosing vibrant weekly, feeding very sparsely and ensuring the filter floss is changed often. Hoping things will start to balance out again.

 

[Nath514]

Question for those who have been using an Oxydator for a while. I have had mine up and running for about 2 weeks. The first week I could visibly see micro bubbles coming out of the ceramic ball on top. Now I don't really see anything coming out. Should I be able to easily see a continuous stream of bubbles?

 

[atoll]

Question for those who have been using an Oxydator for a while. I have had mine up and running for about 2 weeks. The first week I could visibly see micro bubbles coming out of the ceramic ball on top. Now I don't really see anything coming out. Should I be able to easily see a continuous stream of bubbles?

Normal behaviour. When first introduced you see the bubbles emerging I am not sure why refills dont produce similar, maybe.its because the aquarium water is already high in Oxygen so you don't get that initial fizz. However, Oxydators are self regulating so as long as the peroxide is being used up I wouldn't worry. To check it just remove after a few days and see how much peroxide has been used but I guarantee it will be a % used.
Also it will depend on the % of peroxide used along with the number of catalysts.

 

[Nath514]

Normal behaviour. When first introduced you see the bubbles emerging I am not sure why refills dont produce similar, maybe.its because the aquarium water is already high in Oxygen so you don't get that initial fizz. However, Oxydators are self regulating so as long as the peroxide is being used up I wouldn't worry. To check it just remove after a few days and see how much peroxide has been used but I guarantee it will be a % used.
Also it will depend on the % of peroxide used along with the number of catalysts.

Awesome, Thanks for the info. I will take a look today and in a couple and ensure things are working. Ended up going with 6% and 1 catalyst in my A size.

 

[dedragon]

couldnt find it but is there actually any effect of using an oxydator on overall aerobic or anaerobic bacteria colonization levels? @atoll maybe you might know

 

[MnFish1]

couldnt find it but is there actually any effect of using an oxydator on overall aerobic or anaerobic bacteria colonization levels? @atoll maybe you might know

Given the way the samples are taken - you would not see a difference. I'm not sure the places sampled would be the site of 'anaerobic' bacteria. But curiosity makes me ask - why did you ask?

 

[dedragon]

just been wondering about bacterial diversity a lot lately, i recently started to dose pns pro bio and yellow sno so wanted to give the bacteria a chance to thrive

 

[MnFish1]

just been wondering about bacterial diversity a lot lately, i recently started to dose pns pro bio and yellow sno so wanted to give the bacteria a chance to thrive

I am not sure (maybe the company can answer) - that they get a good idea of anaerobic bacteria

 

[dedragon]

Im in contact with the owner of the company rn so we will see what he thinks, he is also a biochemist, so he may give us some more insight into these oxydators as well

 

[atoll]

couldnt find it but is there actually any effect of using an oxydator on overall aerobic or anaerobic bacteria colonization levels? @atoll maybe you might know

The manufacturers make no reference to such as far as I am aware but I have never experienced any issues.