Do I run RODI filters after changing?

Miami Reef

Reef Chem Enthusiast
View Badges
Joined
Sep 8, 2017
Messages
17,251
Reaction score
29,672
Location
Miami
What state or country do you live in
Florida
Rating - 0%
0   0   0
I have the Aqua fx barracuda filter. I am changing the sediment, carbons x2 and a di resin filter.

What’s the order in changing these, and do I flush anything before changing a filter?

I called company and they said as long as I don’t change the membrane, I don’t need to flush anything. But I need second opinions.

This is for my ATO
 
I personally flush each thing, starting from the closest to the input.
So first I put in sediment filter, and rinse. Then carbon, and rinse. Then next carbon, and rinse.

That way you don’t trap particles from the new filters
 
Do I remove my clean cartilages when flushing the membrane? I’m imagining that I remove all the canisters? Won’t it leak?
 
The sediment doesn't need to be flushed. The carbon blocks I use say to flush them for 20 minutes minimum to remove carbon dust. This carbon dust could potentially cause the membrane to fail prematurely. Because of that, I flush each carbon block individually before reconnecting the water line to the next stage, hope that makes sense. I also flush new di resin before using the product water. I typically run 2 gallons through each stage then reroute the tube to my ato reservoir.
 
Every time I change a filter weather it be sediment, carbon, or resin. I turn the knob to flush the membrane for about 5-10min. Any dust from carbon should be flushed before damaging membrane. In addition, it also flushed out any loose contaminants from other sources before they deplete your DI resin. At least that’s how I understood it in the BRS videos from about 4-5 years ago.

This all hinges on, if you have the membrane flush kit Installed.
 
Thanks.

I ordered the filters, but only the sediment and DI arrived so far. I’m going to change the sediment today, but am I allowed to change the DI before the carbon?
 
Thanks.

I ordered the filters, but only the sediment and DI arrived so far. I’m going to change the sediment today, but am I allowed to change the DI before the carbon?
The carbon filter should last the longest (besides membrane), and one of the main purposes is to neutralize the chlorine in your water before it gets to the membrane. Chlorine will damage the membrane.

If you are already running the unit I would switch now. If not I would wait to have a fresh start.
 
I only flush new carbon blocks disconected from the membrane.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 15.2%
  • Lighting, pumps, or other major equipment

    Votes: 4 12.1%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 12.1%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 12.1%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 24.2%
  • Fish or other livestock

    Votes: 1 3.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.0%
  • I’m browsing, but don’t have a specific target

    Votes: 4 12.1%
  • I’m not shopping for reef deals this year

    Votes: 2 6.1%
  • Other (Post in the comments)

    Votes: 1 3.0%
Back
Top
Home
Post thread…
Market
What's new