hworner
Community Member
I got mine directly from the website! https://intankaquatics.com/
Fluval Flex Owners - Experience, Mods, Advice
- Thread starter Reef Racket
- Start date
- Tagged users None
KonradTO
Valuable Member
Well toxic I don't think so but I would try to take it out. You can use some paper towel sheet, let it float for 1 second and take it out, it should trap everything on the surface. Repeat few times you should be able to remove the floating stuff. Otherwise just use a jug..
EpisodeMnH
Community Member
Gotta bump this thread lol, anybody in here running Radions on this tank? I want to upgrade lighting (I’m currently running double Marine 3.0s.) and I’m thinking I’m gonna just go all the way and do either 2 G6 XR15s, or a single G6 XR30. Problem is I’m wondering if the RMS arm mounts fit on this tank. Hanging mounts are not an option for me.
The rms mount will work. If you run a single xr30 you will block up your center chamber a little bit. If you run 2 xr15s you block up your two side chambers and have to remove the lights every time you clean the filters. You are better off running the lines from the sides with the rail across the top
EpisodeMnH
Community Member
I’m not sure what you mean by “rail across the top”, do you have any pictures? I know what you mean by lights on the side, I would just mount them on the side walls instead of the back, but they’re gooseneck style mounts from what I’ve seen, so I’m not sure what rail you’re referring to.
I am glad I found this thread. I set up the 32.5 flex a few months ago and I am generally happy with it, but the hood has been a concern of mine. I’ve also been a bit concerned as to whether I have my lights set correctly.
based on this thread, I’ve looked into the media baskets and that is definitely a better mousetrap than the ones supplied.
as to the hood, I am considering a 4” spacer, fabricated from black pvc sheets. I intend to add numerous small ventilation holes to the back panel.
based on this thread, I’ve looked into the media baskets and that is definitely a better mousetrap than the ones supplied.
as to the hood, I am considering a 4” spacer, fabricated from black pvc sheets. I intend to add numerous small ventilation holes to the back panel.
Nano_Man
Anemone L
I have a smaller fluval flex 37L and the lid has gaps on it when on the tankIt isn’t much but as you said it isn’t flush anymore. It drives me crazy as well lol
ScubaFish802
Just keep swimming
I ended up selling the flex and equipment that I didnt upgrade with to a dad and his daughter so it doesn't bother me anymore 
Saw someone on a page say they heated theirs up and shaped it back but I would be really worried about snapping or melting something personally - clearview makes nice lids
Saw someone on a page say they heated theirs up and shaped it back but I would be really worried about snapping or melting something personally - clearview makes nice lids
Nano_Man
Anemone L
Good little tank it’s classed as a fresh water tank works as a small nano but lights are not up to it . There seems to be plenty of flow from the pump and you would have room for a small protein skimmer in the back chamberI ended up selling the flex and equipment that I didnt upgrade with to a dad and his daughter so it doesn't bother me anymore
OP
OP
The IceCap Nano skimmer was awesome for me with this tank in the center chamber with the return and heater!
Similar threads
