Yes. However I didn’t calibrate it and I think that prevents the pump from doing anything schedule wise. Also see my previous post with the results.
6000/ day is currently the amount of effluent I’m dosing the tank…so you are correct. 500ml/ every 2 hours. Doser should be able to handle that, right ?? Still not sure what the 88.9 is. I’m kinda sure it’s the amount short of making the 500.
Are you referring to the log for the pump? Just make sure you have the speed or dlow rate on the pump set to a speed that can deliver the 500ml before the 2hrs is up. You have to set it on the pump output and in the schedule.
It’s set to the fasted allowed which is like 330ml/minute. I don’t know what the log for the pump is. 88.9 is displayed in the output section of the pump on a pump icon.
That does not have anything to do with the dosing. Is one of these numbers what you are referring to?
The app get it from the cloud so there might be some delay between the pump and the screen. Did you find the output logs in the left menu?
When you say the count stalls it will do that when the app needs to be refreshed
You will still want to calibrate it if the amount is something critical but do it at the flow rate you are going to use. The way Hydros calibrates is it runs the pump for 1 minute and you measure the amount and tell the Hydros how much was dispensed. It then uses that to either reduce time run or add to it to get the desired does you want to dose. I would also if it was me drop the flow off of maximum flow. I don't like running things at their absolute maximum ratings if I don't have to. You should be able to run at 200ml a minute without any issues it will just run longer each time.
Good idea. Even though it’s only a $39 pump. Might as well make it last as long as possible.
I though they were about $330.
The pump itself is a $39 kamoer.
