Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Already in my shopping cartI suggest 4 pcs T75 with 2 controller. it is 2 set of T75-2 (reef version).
II installed second lamp this weekend, and worked on cutting a bit of the birdnest......... ended up with removing about 90% of it...(will be good media for CArx) will do more complete measurement this weekend. As for adding 2 more to my setup, it is the plan. I spoke with the seller, Oliver, and he assured me I could buy only the lamps as add-on, without the controller; it will probably wait for late summer though. I will go more into the controller too. It seams to have a wide variety of possible configurations: going from seasons simulation, moonlight time offset, algae elimination, acclimation, and so on. One thing to know, on the controller, is that even though you can have 4 lamps on it, it will not control a lamp individually. So if you want stronger light for some SPS on 1 side of the tank, and less light for softies on the other side, you would need different controllers.
hi. I’m very new to the saltwater aquarium. I have a 4ft 150g DT. I’ve purchased 3 Rs90 leds as starters. Can you help me with optimal settings . At the moment I only have fish.Hi I am looking to change my old maxspect razor 420r (have 1 x 160w & 2 x 120w over 180gal mixed reef) and I was looking the popbloom rs90 (I know, chinese light) which looks a lot like the RS reefled90, but at half the price and without wifi (I dont need, once my light are programmed, I dont change it). anyone had the chance to try em yet? If the specs indicated are like indicated, it would be awesome at around 850$cad for 4 light.
That’s what I’ve done. I’m very new to it so I’m playing with the lights and channels to see how things work and look. I believe I will have to be more specific once I start to reef. I’ve ordered a couple of orphek led bars to supplement popblooms. Thanks for replying.hi, since you dont have corals now, you can put any setting you like. Personally, I prefer the 4 seasons setting. Maybe change to slow acclimation when you add some corals.
Does the fan has variable speed now? That is a feature i really miss. I run the light at max 40% (nano tank), i'm pretty sure the 100% fanspeed is way overkill for my situation.Ok quick update, I received the wifi board from Oliver on monday, just had time to install it today and do some quick tests (and clean my very dirty lamp...). Here some pics of the process.no burn mark on the lens after 1.5 years of running 100%, that is good news.1.5 years of accumulated salt and dust...heatsink was prety hot to the tpuch, this might be the cause, fins are almost blocked. I guess a yearly cleanup can be important if you dont want your lamp to overheat.led panel is pristine, no discoloration or darkening.thats the new boardother side, got the fan connection on the bottom right and the 8 pins that connect to led driverremove the old controller board with its cable. Install the new board in its place.if your lamp is dirty like mine, take a few minute to clean it up. Vinegar clean with brush and distilled water rince worked well. Careful not to wet electronics side.better, like new.once you put power to the lamp, it automatically goes into discovery mode (blue light flashing quickly). tuya app was quick to discover and connect.
Will do some more testing today, take more pics etc. Looks prety good. Interface is easy to understand.
as oliver explained "..., the fan-signal is PWM, but the fan is not PWM controlled." the problem is the fan itself, you would have to replace it with a PWM controlled fan to achieve that. He talked about maybe an upgrade for next hardware version of the lamps. maybe @Oliver@DSunY can chime in with an update on that?Does the fan has variable speed now? That is a feature i really miss. I run the light at max 40% (nano tank), i'm pretty sure the 100% fanspeed is way overkill for my situation.
Was even thinking about implementing a fan controller, i have one in my computer i can miss.
By the way, if i remember correct there is also no thermal protection on board right? If the fan goes the light will burn itself down?as oliver explained "..., the fan-signal is PWM, but the fan is not PWM controlled." the problem is the fan itself, you would have to replace it with a PWM controlled fan to achieve that. He talked about maybe an upgrade for next hardware version of the lamps. maybe @Oliver@DSunY can chime in with an update on that?
its mean that it "can" burn itself out. I mean, does the fan make it a life or death difference on the heatsink? not sure, its pretty big piece of heatsink. I can say that the accumulated dust and gunk on my lamp already blocked most of the air circulation between the fins; yes, it was hot, but still working perfectly and nowhere near being a hazard to circuitry.By the way, if i remember correct there is also no thermal protection on board right? If the fan goes the light will burn itself down?
its mean that it "can" burn itself out. I mean, does the fan make it a life or death difference on the heatsink? not sure, its pretty big piece of heatsink. I can say that the accumulated dust and gunk on my lamp already blocked most of the air circulation between the fins; yes, it was hot, but still working perfectly and nowhere near being a hazard to circuitry.
There is no fan-speed in Hertz RL90, due to there is only 4 PWM signal in Tuya wifi module and all 4 channels have to work for LED brightness.as oliver explained "..., the fan-signal is PWM, but the fan is not PWM controlled." the problem is the fan itself, you would have to replace it with a PWM controlled fan to achieve that. He talked about maybe an upgrade for next hardware version of the lamps. maybe @Oliver@DSunY can chime in with an update on that?
There is no fan-speed in Hertz RL90, due to there is only 4 PWM signal in Tuya wifi module and all 4 channels have to work for LED brightness.
Maybe a new fan is a nessary component in wifi updata package.
Please there are some stickers in the package I send to you. (write: hertz RL90....)
it used to cover the hole after removeing the cords.
Dear ,Any update on this, or am i too early?