Continuing to do a little work here and there.
Last night I spent playing with about 30 (yes, thirty... give or take) leveling feet.
They are all around the perimeter and on the cross braces.
I worked on all the perimeter ones first, then flipped the tank up on one end and used a straight edge to get all the center ones at the correct length to match the perimeter ones.
I've basically got it perfectly level but will re-check before the tank goes on. I'll be moving it around quite a bit between now and then as I install various things I'd rather do without the tank on top.
Here's one end of the stand showing the leveling feet.
And now I'm in the middle of drilling and test fitting the GHL "Flex Mounts" for the lights.
I've got two of the three installed. Need to add an extra brace in back for the third due to the large opening in the back wall of the stand.
Last night I spent playing with about 30 (yes, thirty... give or take) leveling feet.
They are all around the perimeter and on the cross braces.
I worked on all the perimeter ones first, then flipped the tank up on one end and used a straight edge to get all the center ones at the correct length to match the perimeter ones.
I've basically got it perfectly level but will re-check before the tank goes on. I'll be moving it around quite a bit between now and then as I install various things I'd rather do without the tank on top.
Here's one end of the stand showing the leveling feet.
And now I'm in the middle of drilling and test fitting the GHL "Flex Mounts" for the lights.
I've got two of the three installed. Need to add an extra brace in back for the third due to the large opening in the back wall of the stand.