Used tank

3l3ments

Community Member
View Badges
Joined
Apr 14, 2014
Messages
93
Reaction score
42
Location
Riverton, UT
Rating - 0%
0   0   0
I was looking at a used tank but with all the iffy things I hear about rea sea tanks I am a bit nervous. Its a Red Sea Reefer S-500 Max. What are your guys thoughts?

1783704612772.png
 
OP
OP
3l3ments

3l3ments

Community Member
View Badges
Joined
Apr 14, 2014
Messages
93
Reaction score
42
Location
Riverton, UT
Rating - 0%
0   0   0
Also the full list of parts and price is $800
131 gallon fish tank with sump and stand50”x27”x61”
Equipment included:-Red Sea reefmat 500 with new roll-Bubble
magus curve 7 Skimmer-
1000 W heater-
Aquamaxx bio pellet reactor-
11 W UV sterilizer -Hygger return pump
 

StartingATank

Self-Diagnosed Coral Addict
View Badges
Joined
Nov 30, 2024
Messages
1,827
Reaction score
1,386
Location
DFW Metroplex
Rating - 100%
1   0   0
What I would do is look at the seams and see if there is any sign of seam failures, or beginning of failures, and if not, I would probably take it, but the tank would probably only last for 5-10 years, more or less.
 

Fish Fan

Master of Disaster
View Badges
Joined
Dec 8, 2017
Messages
13,383
Reaction score
34,897
Location
461 Ocean Boulevard
Rating - 100%
6   0   0
Just from what I've seen here on this forum, I would personally pass on a Red Sea tank even if it was free.

Good luck with whatever you decide!
 

Fish Fan

Master of Disaster
View Badges
Joined
Dec 8, 2017
Messages
13,383
Reaction score
34,897
Location
461 Ocean Boulevard
Rating - 100%
6   0   0
Consider, it's not just if or when this tank may fail, it's also the loss of livestock and all the hard work that went into the setup. Not to mention the damage to your home could be extensive, and not all home owner's insurance policies covers fish tank disasters.
 

PPBlimpy

Valuable Member
View Badges
Joined
Jan 9, 2025
Messages
1,802
Reaction score
2,253
Location
Cumberland
Rating - 0%
0   0   0
personally I would probably buy it, but I have taken redsea tanks, cut them apart and rebuilt them. I would rebuild this before putting water back in. i am also looking for one local with a popped seam so i can rebuild and cut down to 14" to make a matching frag tank.

does it come with livestock rock etc? no lights?

Its not a great deal or anything. has some decent equipment. but i would pass unless you have time and looking for a project

I bought my RS s1000 fully setup with lights running for $1k
 

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,803
Reaction score
8,247
Location
NY
Rating - 0%
0   0   0
If it was free, I'd likely take it to see if I can break it down and reseal it before use. But that's me.

But the price is too much for tanks whose seams are known to fail quickly.
 

Quietman

2500 Club Member
View Badges
Joined
May 14, 2017
Messages
3,536
Reaction score
11,034
Location
Indiana - born and bred
Rating - 0%
0   0   0
I believe that's a framed tank. I've not heard any unusual issues with Red Sea framed tank. A tank framed in anodized aluminum could easily last 20 years or more if it's taken care of correctly. Check the build and age to make sure that's all correct. Do the normal seam checks as has been stated before.

If it's in good shape and shows no sign of abuse or extraordinary wear (chips in glass, worn seals, bubble in seals) and it's a decent price for it's age, then I'd consider it strongly.

For some background. Big difference in rimless tanks and framed tanks as far as longevity and durability in my opinion. Red Sea or not. Red Sea does have a higher than normal reported failure rate from users on the forums. Likely due to combination of thinner glass and silicone used. I think they've tried to address in newer G3 models. In general, rimless tanks have much less tolerance in joint constructions due to nature of rimless tanks not having support and everything is dependent on the silicone and glass thickness. Framed tanks and especially aluminum framed tanks are more forgiving of construction techniques and silicone especially in larger tanks.

Personally, I wouldn't buy a large rimless tank Red Sea or otherwise. My opinion of course.
 
Last edited:

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,803
Reaction score
8,247
Location
NY
Rating - 0%
0   0   0
I believe that's a framed tank. I've not heard any unusual issues with Red Sea framed tank. A tank framed in anodized aluminum could easily last 20 years or more if it's taken care of correctly. Check the build and age to make sure that's all correct. Do the normal seam checks as has been stated before.

If it's in good shape and shows no sign of abuse or extraordinary wear (chips in glass, worn seals, bubble in seals) and it's a decent price for it's age, then I'd consider it strongly.

For some background. Big difference in rimless tanks and framed tanks as far as longevity and durability in my opinion. Red Sea or not. Red Sea does have a higher than normal reported failure rate from users on the forums. Likely due to combination of thinner glass and silicone used. I think they've tried to address in newer G3 models. In general, rimless tanks have much less tolerance in joint constructions due to nature of rimless tanks not having support and everything is dependent on the silicone and glass thickness. Framed tanks and especially aluminum framed tanks are more forgiving of construction techniques and silicone especially in larger tanks.

Personally, I wouldn't buy a large rimless tank Red Sea or otherwise. My opinion of course.

Nice catch; it does looked framed!

If so, I would likely take a chance on it.
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new