UV damage in sump

  • Thread starter Thread starter jiggysmb
  • Start date Start date
  • Tagged users Tagged users None

jiggysmb

Active Member
View Badges
Joined
May 17, 2020
Messages
106
Reaction score
46
What state or country do you live in
Pennsylvania
Rating - 0%
0   0   0
I placed a UV light directly in my eshopps sump for a week. The eshopps site says they are UV resistant and I read acrylic has a 3% degradation to UV over a decade of sun exposure, so I thought it would be ok. Today I noticed hundreds of small cracks in the acrylic that must be from the UV light because there is no damage in the circular area which was where the suction cup was for the UV light. Is this just cosmetic or has the acrylic become brittle?

gNQRygI.jpg
 
I placed a UV light directly in my eshopps sump for a week. The eshopps site says they are UV resistant and I read acrylic has a 3% degradation to UV over a decade of sun exposure, so I thought it would be ok. Today I noticed hundreds of small cracks in the acrylic that must be from the UV light because there is no damage in the circular area which was where the suction cup was for the UV light. Is this just cosmetic or has the acrylic become brittle?

gNQRygI.jpg

What do you mean when you say you put a UV light direct in the sump?
Do you have a link to the light you used?
 
the uv lights we use are incapsulated so you cant see the light. uv light can cause damage to alot of things including your eyes.
The uv light is sold for reef tanks. It has suction cups and shows in the instructions to attach it to a side in your sump.
 
It was 5 watt for 5 days. I see many post recommending just dropping them in the sump.
Okay, I've never heard of them.
Sounds dangerous and probably not legal here.

It looks like either heat or UV damage.
 
The uv light is sold for reef tanks. It has suction cups and shows in the instructions to attach it to a side in your sump.
YEP, there's several direct from China on amazon with no shell to protect the user....they are dangerous when used in the open like that.
 
Ah, yeah, that's not safe. Think of it like those little gallon tanks sold for bettas- you can use it that way, but that doesn't make it a good idea.
 
The damage to the acrylic looks similar to what can happen if you over heat acrylic trying to buff out a scratch or pushing a dull drill or saw when making a cut /hole.
I have a skimmer that is crazed like that. The skimmer body is much thinner material (I would presume) but it has held water for many years inspite of the crazing damage and looking uglier than sin. I think it crazed from using vinegar to clean it? The microcracks will spread with time across the entire sump. IF it bothers you now, I would replace it, but again I think it will hold water fine.
 

TOP 10 Trending Threads

WHAT FIRST SPARKED YOUR INTEREST IN REEFING?

  • I saw a reef tank that hooked me

    Votes: 17 23.6%
  • I was already keeping freshwater aquariums

    Votes: 29 40.3%
  • A particular fish got me interested

    Votes: 10 13.9%
  • Corals and inverts were the draw

    Votes: 13 18.1%
  • A friend or family member introduced me

    Votes: 8 11.1%
  • The science and ecosystem challenge appealed to me

    Votes: 14 19.4%
  • I stumbled into it… and here we are

    Votes: 7 9.7%
  • Other (Post in the comments)

    Votes: 9 12.5%
Back
Top
Home
Post thread…
Market
What's new