oreo54
5000 Club Member
- Joined
- Sep 18, 2017
- Messages
- 7,028
- Reaction score
- 4,177
- What state or country do you live in
- Wisconsin
Last edited:
ATI Straton LED Light - Comments, Review, PAR, Coverage, Discuss...
- Thread starter Reef-Engineer
- Start date
-
- Tags
- ati led led aquarium light lunar straton
- Tagged users None
Mount?
I saw that, won't fit a 96" tank
I agree, that’s still my beef with ATI is the rail and brackets should’ve been released with the lights here in the US. Same goes for these lights. I enjoy trying new lights but probably not best for my tank or my marriage
- Joined
- Jan 6, 2021
- Messages
- 89
- Reaction score
- 100
- Location
- Long Island
- What state or country do you live in
- New York
I saw that. Thanks. Was hoping someone knew more about this company. Seem new to the US
PanhandleReef
Active Member
- Joined
- Dec 22, 2018
- Messages
- 131
- Reaction score
- 219
- What state or country do you live in
- Florida
Surprising you actually found a place to preorder. Most places I have contacted said they have no idea when they will be in stock so currently not taking orders.
jcosta98
Active Member
- Joined
- Sep 20, 2020
- Messages
- 267
- Reaction score
- 171
- Location
- Portugal
- What state or country do you live in
- Other International
Know someone running a full blast SPS cube with one of these , they are perfect . They are a little bit more expensive than the stratons too :D Cost like 50% more than the stratons. they also sell led bars to compliment the coverage
- Joined
- Jan 6, 2021
- Messages
- 89
- Reaction score
- 100
- Location
- Long Island
- What state or country do you live in
- New York
Contact ATI US dealers. Some are more willing than others. Rumor is the next 4-8 weeks I believe. How many are coming is the wild card.
I don’t believe they’re double the price of the Stratons. Check your work ;)
Mine are at 9 inches and am using the SPS preset.
- Joined
- Jan 6, 2021
- Messages
- 89
- Reaction score
- 100
- Location
- Long Island
- What state or country do you live in
- New York
Karliefish
Well-Known Member
- Joined
- Apr 12, 2020
- Messages
- 765
- Reaction score
- 493
- Location
- Western North Carolina
- What state or country do you live in
- Nebraska
Hey everyone - I've learned so much about my new ATI Straton lights by following this great thread - so thank you. Now I need some help. I have been trying to update my ATI Straton lights to the latest firmware shown on the AIT North America site, version: 2.3.1 Every time I run the firmware upgrade I get a message that firmware upgrade completed successfully. However, when I restart the ATI Straton application and go into "settings" it still is showing that I am running the older version: 2.1.9
I've contacted ATI North America Support and they told me to do a hard reset on each of my lights (I have four) and then do the firmware update after directly connecting the light via my PC (RJ45 connection). Still no success. Anyone else having problems? Any suggestions to get the new firmware installed on my lights?
Thanks again!
I've contacted ATI North America Support and they told me to do a hard reset on each of my lights (I have four) and then do the firmware update after directly connecting the light via my PC (RJ45 connection). Still no success. Anyone else having problems? Any suggestions to get the new firmware installed on my lights?
Thanks again!
@Karliefish I did a step by step in this thread, I’ll see if I can find it
Read #518 and on
I had the same issue, also make sure you are not trying to load the .zip, has to be the .tar
@ATI North America I would recommend to your engineers to update the website or whatever to include the instructions that you have to load the .tar
I’ve had multiple people ping me on firmware issues and a local reefer had the same issue when I helped them. I can confirm the light will let you select the .zip and load even though it will never take
Read #518 and on
I had the same issue, also make sure you are not trying to load the .zip, has to be the .tar
@ATI North America I would recommend to your engineers to update the website or whatever to include the instructions that you have to load the .tar
I’ve had multiple people ping me on firmware issues and a local reefer had the same issue when I helped them. I can confirm the light will let you select the .zip and load even though it will never take
Last edited:
Rando
Active Member
- Joined
- Nov 17, 2018
- Messages
- 299
- Reaction score
- 132
- Location
- Germany
- What state or country do you live in
- Other International
i got two Stratons on friday and i'm not really satisfied. the fact that it has so little PAR can only be one defective ?!
a little over 300 PAR with the LPS / SPS Prog. 100%, at 30 cm below the water surface and a lamp height of 15 cm ..
the radion makes there with a similar program over 400 PAR !! I measured with an Apogee MQ-510!
a little over 300 PAR with the LPS / SPS Prog. 100%, at 30 cm below the water surface and a lamp height of 15 cm ..
the radion makes there with a similar program over 400 PAR !! I measured with an Apogee MQ-510!
Last edited:
i got two Stratons on friday and i'm not really satisfied. the fact that it has so little PAR can only be one defective ?!
a little over 300 PAR with the LPS / SPS Prog. 100%, at 30 cm below the water surface and a lamp height of 15 cm ..
the radion makes there with a similar program over 400 PAR !! I measured with an Apogee MQ-510!
Yeah, no way that’s right. Are you sure you tested it correct on the timeline? Do you have all your zones matching? Reason I ask is that photo looks very blue for the LPS/SPS setting. Can you screen shot your program
