Cyano algae

  • Thread starter Thread starter fishboy1
  • Start date Start date
  • Tagged users Tagged users None

fishboy1

Active Member
View Badges
Joined
Apr 4, 2020
Messages
129
Reaction score
100
Rating - 0%
0   0   0
Is this normal for a cycle to come to and end. Its been cycling since the 2nd week of December and I have 0 ammonia.
PXL_20260208_201750796.jpg
PXL_20260208_201758223.jpg
 
Is this normal for a cycle to come to and end. Its been cycling since the 2nd week of December and I have 0 ammonia.
PXL_20260208_201750796.jpg
PXL_20260208_201758223.jpg
What do you mean it has been cycling since December? You have coral in the aquarium.
 
Is this normal for a cycle to come to and end. Its been cycling since the 2nd week of December and I have 0 ammonia.
PXL_20260208_201750796.jpg
PXL_20260208_201758223.jpg
As stated, tank is more than cycled. You are getting this due to several factors. Cyano blooms typically happen when phosphate, nitrate and other organic compound levels are too high where there are areas with little flow, detritus builds up and becomes a base for cyano. Water changes are important unlike what the perception of not doing one which reduces the organic content that feeds cyano.
Some of the most common causes include:
- Protein skimmer which fills water with air bubbles which form from the reaction chamber allow dissolved organic compound molecules stick to them. Foam forms at the surface of the water and is then transferred to the collection cup, where it settles as skim-mate. When a protein skimmer is ineffective or absent or cant keep up with the tank, the air bubbles created might be insufficient and can trigger this outbreak .
- Using Aminos can actually feed cyano.
- Overstocking / overfeeding, your tank with nutrients is often causes cyano
- Adding live rock that isn’t completely cured will be a breeding ground for this red slime .
- If you don’t change your water regularly, you’ll soon have this red substance as regular water changes dissolve nutrients which support cyano
- Using water high in nitrates or phosphates are a base for cyano. . . . . Tap water is an example of po4 and no3 introduction.
- Inadequate water flow is often a chief cause of cyano as slow moving water combined with excessive dissolved nutrients creates red slime algae

I recommend to reduce white light intensity or even turn them off for 3-5 days. Add liquid bacteria daily for a week during the day at 1.5ml per 10 gallons. Add Hydrogen peroxide at night at 1ml per 10 gallons. Add a pouch of chemipure Elite which will balance phos and nitrate and keep them in check.

After the 5 days, add a few snails such as cerith, margarita, astrea and nassarius plus 6-8 blue leg hermits to take control.
 
What do you mean it has been cycling since December? You have coral in the aquarium.
Basically my original tank sprung a leak 2 weeks before Christmas. The sealant came away from the back chambers. I came home to a part empty tank and smoke as my circulation pump burned out. So this tank was a panic buy and everything in it was from my original tank even the water.
PXL_20251216_130404614.jpg
PXL_20251203_102657965.jpg
 
Last edited:

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 37 53.6%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 32 46.4%
Back
Top
Home
Post thread…
Market
What's new