IM Penninsula 14 powerhead placement

woodyarmadillo

The other Tim
View Badges
Joined
Mar 5, 2023
Messages
5,355
Reaction score
9,233
Location
Texas
Rating - 0%
0   0   0
Hey new reefer with a question about powerhead placement in my setup. I am adding some SPS to the top of my scape and I have a little Nero 3 powerhead. I’m thinking about moving it up to about 2/3 up on the overflow side to get some good indirect flow on the SPS corals. Is it a bad idea to mount a powerhead right underneath an overflow?
AB4A04B0-FA2E-48C1-8D26-743087DF907B.jpeg
 
OP
OP
woodyarmadillo

woodyarmadillo

The other Tim
View Badges
Joined
Mar 5, 2023
Messages
5,355
Reaction score
9,233
Location
Texas
Rating - 0%
0   0   0
You'll probably have to play around with it a bit to find the ideal spot for you, but no - mounting it under the overflow isn't necessarily a bad spot.
I’ve been playing around with the flow a lot, a few inches below the overflow seems to make the most since since most of my lower flow stuff is on the other side. It’s either that or in the middle hitting the SPS corals direct on low flow. Do you think that is okay? I can turn that Nero 3 down alot but those SPS corals are going to be getting hit with direct flow about 5”-10” away from powerhead. That little mighty jet in there seems to provide plenty of flow for the other lower flow softies and LPS in the tank.
 

X-37B

Fight The Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,229
Reaction score
16,018
Location
The Outer Limits
Rating - 0%
0   0   0
I would put it on the wall opposite the return.
I run it that way on my 18" 20g nano cube.
I run a jebao and run it on else mode and switch it up often to wave mode. Nothing gets a constant direct flow. It works great for sps.
Keep your return pointed at the surface.

Nice tank! Looks like your off to a great start.
 
OP
OP
woodyarmadillo

woodyarmadillo

The other Tim
View Badges
Joined
Mar 5, 2023
Messages
5,355
Reaction score
9,233
Location
Texas
Rating - 0%
0   0   0
I would put it on the wall opposite the return.
I run it that way on my 18" 20g nano cube.
I run a jebao and run it on else mode and switch it up often to wave mode. Nothing gets a constant direct flow. It works great for sps.
Keep your return pointed at the surface.

Nice tank! Looks like your off to a great start.
Thanks! Yeah that’s what I was thinking. I will do that! I keep my return pointed at surface.
 

Tentacled trailblazer in your tank: Have you ever kept a large starfish?

  • I currently have a starfish in my tank.

    Votes: 24 28.9%
  • Not currently, but I have kept a starfish in the past.

    Votes: 19 22.9%
  • I have never kept a starfish, but I hope to in the future.

    Votes: 22 26.5%
  • I have no plans to keep a starfish.

    Votes: 18 21.7%
  • Other.

    Votes: 0 0.0%
Back
Top