Nope. I am checking someting..it look like if I push the right button on my 75, it switches the spectrum. Wondering if this is the K7-2 schedule...gotta experiment.
Just click the button to put it back into program mode. Then open K72 and click H.
You choose K72 on the controller. The light just needs the "indicator light" flashing blue.
Thats the thing. i ant get it back into indicator flashing mode. Goes to red.
I was having this problem the other day. I don't remember what I did to get it into program mode.
The 75 should be the same.
I assumed but I wasn't sure if it just had a left and right button the same as the 140
If I recall correctly (I guess I could walk in there and verify) it has two. The Pro II only has 1 button.
I'd assume it probably does so the programming works the same as the 140.
If the indicator is blinking blue, go to K72 program and select H. See if it works.
Agreed. If trying to change the program I wouldn't worry about what color the lights themselves are as long as the indicator led is flashing blue you should be okay
But at least you figured it out! I decided to give my Pro II another shot at pairing with the V3 controller the other day again... It works but not correctly. I have to run them on their own controllers.
I am running a T5 hybrid. I had to turn mine down..way down...as I was blasting too much PAR at my corals. I have 4x54 T5s and running 2 140 watters and 1 75 watter at max 20%. More than enough light for my corals. Once I brought these down..tank is doing fantastic.
Running two of the new V3’s on a 120x50x50 and have set them to run the default LPS setting for now slightly turned down - curious as to how others have these set with similar sized tanks - mostly soft corals with LPS
Chris
