Need HELP! Aussie Gold Torch shriveling up.

  • Thread starter Thread starter Kmann321
  • Start date Start date
  • Tagged users Tagged users None

Kmann321

New Member
View Badges
Joined
Mar 14, 2020
Messages
17
Reaction score
5
Rating - 0%
0   0   0
Help! My gold torch coral is shriveled up! I don't know what is causing this to happen. ALK 10.2/ Calc 444/ phos 0.02. I have put it in a lower flow area and have since added some chemi pure blue to the filter and have done a 10% water change. Any advice would be greatly appreciated THANK YOU.

Torch.jpg torch2.jpg
 
Sorry can’t help but might be worth marking your thread with the emergency label.
 
Could you tell us a little more about your tank other parameters and how long has tank been running?
 
im sorry im new to the forum. How do i do that?

try clicking edit post, then see if there is an option to edit the title, if there is there will be a drop down menu, select the emergency label.
 
Could you tell us a little more about your tank other parameters and how long has tank been running?
The tank has been running for a little over a year and a half. What other water parameters should it test for?
 
I never had good luck with aussie gold torches. other torches have been thriving for 3 years. been through 2 aussie gold torches and no luck. some corals I have success with others I don't.
Exact same experience. Unfortunately, this seems to be a common thread. Wish I knew why.
 
Okay so I have had the same problem I fixed it by preventing my clownfish from hosting it even if you think there not they are
 
I’m not 100% if that was the fix but moving it and letting it do it’s thing worked for me
 
Okay so I have had the same problem I fixed it by preventing my clownfish from hosting it even if you think there not they are
Not my issue, for sure. My clowns have a nem, and I have another torch that is thriving.
 
Just a thought but if ypur pgos was at .02 and then you added new chemi pure blue it could have stripped it down to 0.

What are your other parameters including salinity? Nitrates and phos are no good for corals at 0.
 
Just a thought but if ypur pgos was at .02 and then you added new chemi pure blue it could have stripped it down to 0.

What are your other parameters including salinity? Nitrates and phos are no good for corals at 0.
+1 the phos is probably super low rn. What are nitrates?
 
Just a thought but if ypur pgos was at .02 and then you added new chemi pure blue it could have stripped it down to 0.

What are your other parameters including salinity? Nitrates and phos are no good for corals at 0.
Your right the chemi knocked the pho and nitrate down to 0. My salinity is 1.026. I will remove the chemipure
 
Exact same experience. Unfortunately, this seems to be a common thread. Wish I knew why.
From what I understand these aussie golds are collected in shallow brackish water river mouths in australia.
Lots of nutrients suspended in the water and somewhat lower salinity than a typical hobbiests reef.

This is what i heard from a local shop owner at least.
And then he told me the diver who collects these ended up meeting the bad side of a saltwater croc. RIP.
 
From what I understand these aussie golds are collected in shallow brackish water river mouths in australia.
Lots of nutrients suspended in the water and somewhat lower salinity than a typical hobbiests reef.

This is what i heard from a local shop owner at least.
And then he told me the diver who collects these ended up meeting the bad side of a saltwater croc. RIP.
Holy cow! Ok, I will see if i can maybe slowly raise the nutrients in the tank to a manageable level.
 

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 61 55.5%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 49 44.5%
Back
Top
Home
Post thread…
Market
What's new