@Bulk Reef Supply Just share my shopping list for the last few years should take care of it!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
@Bulk Reef Supply Just share my shopping list for the last few years should take care of it!
We have 5 different sizes in our TRS line and 3 that are specifically designed to go into the Red Sea Reefer systems. I'd love to hear what everyone thinks of our designs.
Thanks for your questions! On most of our units, there are dosing holes in the return. On other models, there wasn't enough space to add it to that section and still get most return pumps in there. For a red sea 250, we have the rsr250 on our site. That is specifically designed for that tank. I can always move them to the return section for you.I freaking love the design of them. Really hoping I win the contest.
I did have a question about the dosing, I was just reading the Triton forum and they were saying the dosing is recommended in the return chamber. But on the smaller TRS20 the dosing racks appear to be in the overlow chamber just before the fuge. Is that correct. Any anticipated issues there?
Which Reefer does the TRS20 fit? The Reefer 250?
I have an emerald 39 on my 55 and I run a Life Reef skimmer in the second compartment no problemsThe Emerald sumps have the skimmer section 1st and the 'frug 2nd which is not ideal for Triton. 'frug>skimmer>return pump
Thanks for your questions! On most of our units, there are dosing holes in the return. On other models, there wasn't enough space to add it to that section and still get most return pumps in there. For a red sea 250, we have the rsr250 on our site. That is specifically designed for that tank. I can always move them to the return section for you.
I know this is an older thread, but I have a question about skimmer placement. I have a Red Sea Reefer 750XXL, with factory supplied sump. I have this currently set up "triton" style with Overflow/Refugium/Skimmer/Return sections. I constantly have an issue with skimmer performance due to small bits of Cheato breaking off and getting thru weir, and these get picked up by the needle wheel of skimmer (R/O 202S), which requires removal to clean out. Can I effectively "swap" the Refugium and skimmer sections around, so that the skimmer is right behind the overflow return/filter bag (not used) area?
Also, with regards to Cheato, I find that it gets clogged up with GHA in sump (none in tank). I just cleaned out the whole sump (in planning for possible move above) of algae (put Cheato in overflow section temporarily). Is there anyway to clear the Cheato of GHA? I'm guessing the GHA is out-competing the Cheato for nutrients, with N03 at 10 and P04 at .16 currently.
Thank you in advance for any feedback.
Sincerely,
D Greg