Rodi Not Producing Wastewater

[Reefer Ryan]

I’m trying to figure out why my 4 stage rodi unit isn’t producing any wastewater. I just replaced all the filters and replaced the membrane along with the flush valve. I think I did everything correctly as I have done this before, can anyone see if I have some hoses crossed or something else I may have done wrong.
Any help would be much appreciated

 

[kschweer]

Your flush valve is in the “flush” position. Try turning the handle and see if it makes a difference.

 

[Reefer Ryan]

Your flush valve is in the “flush” position. Try turning the handle and see if it makes a difference.

In the past when I would flush the membrane the flow from the wastewater line would increase dramatically. Now, when in the flush position nothing is hardly coming out. When in the “normal use” position it drips very, very slowly. I replaced the membrane with a 150GPD, is this normal

 

[Dom]

Your flush valve is in the “flush” position. Try turning the handle and see if it makes a difference.

Flush position or not, you will get "waste water" its just the flow rate that changes.