Hanging hydra 52's

[Reefpro]

So I am going to hang 4 hydra 52's over new tank. It is 60x30x24. I want hang them perp to front of tank what type of rails can I use to mount them too. Pictures if you have them would be great

 

[KorL]

I used 80/20 aluminum.

 

[Reefpro]

I used 80/20 aluminum.

So I need to turn my lights is that possible using that 80/20. How did you mount to the aluminum?

 

[KorL]

The aluminum has "T" slot groove. With screws attached to the ai fixture, you can slide the fixture back and forth. I had my lights parallel to the tank. Guess I read your post wrong. But ai sells a couple of different types of hanging brackets where you can mount either parallel or pendicular. Even with the 80/20 aluminum, it can be configured different ways with different assessories

 

[Reefpro]

The aluminum has "T" slot groove. With screws attached to the ai fixture, you can slide the fixture back and forth. I had my lights parallel to the tank. Guess I read your post wrong. But ai sells a couple of different types of hanging brackets where you can mount either parallel or pendicular. Even with the 80/20 aluminum, it can be configured different ways with different assessories

Where do you get the 80/20, how much$ and did it come black?

 

[KorL]

I got mine from ebay. But I found out later there was a local distributer. Look up 8020 aluminum. So many different types and accessories to choose from.

 

[hart24601]

Can't you just use the AI classic rail mount and hanging kit? Pretty much what it was made for hanging perpendicular to the tank. It's the classic rails with mount, not the EXT.

http://www.aquaillumination.com/accessories/