- Joined
- Jan 16, 2018
- Messages
- 1,391
- Reaction score
- 2,175
- Location
- Paris
- What state or country do you live in
- Other International
Thanks! A great group of fish!
Flippers reef 125 gallon
- Build Thread
- Thread starter Flippers4pups
- Start date
- Tagged users None
OP
OP
Flippers4pups
Fins up since 1993
Thanks!
U
User1
Guest
One is a lonely number...I'm thinking THREE!
OP
OP
Flippers4pups
Fins up since 1993
My blue star leopard came from a LFS that had taken them in on a tank take down. It was already eating and adapted to a tank. I was very fortunate.
RichtheReefer21
Scrap Yard Reefer
Excellence Award
Reef Tank 365
Article Contributor
Reef Squad Emeritus
Hospitality Award
Always a relief when a new addition just glides in to the reef. Sweet.
OP
OP
Flippers4pups
Fins up since 1993
I’m a big advocate for quarantine/observation/Hospital tanks. Every reefer should have one!
OP
OP
Flippers4pups
Fins up since 1993
Well I did something I hadn't done before ever, adjusted my freshly made saltwater alkalinity.
I had made up some saltwater Friday and decided to test it's alkalinity. It was at 11dkh. My DT is at 9.3. last night I tested it again and it rose to 14 dkh. Having some muriatic acid on hand, I dosed 1.2 ml of acid for each point of dkh to drop. So I started out with 4 ml of acid, allowed to mix and tested it. It came out at 10.3 dkh. Close but not there yet. Added another 1ml of acid and tested it. Came out at 9.3 dkh! Success! But dropping alkalinity with acid comes a price, PH. It was at 7!
So I added a air stone on a air pump to the saltwater over night. Bingo! This morning it was at 7.8!
Did the water change and everything in the DT looks great!
I'll be doing this from now on!
I had made up some saltwater Friday and decided to test it's alkalinity. It was at 11dkh. My DT is at 9.3. last night I tested it again and it rose to 14 dkh. Having some muriatic acid on hand, I dosed 1.2 ml of acid for each point of dkh to drop. So I started out with 4 ml of acid, allowed to mix and tested it. It came out at 10.3 dkh. Close but not there yet. Added another 1ml of acid and tested it. Came out at 9.3 dkh! Success! But dropping alkalinity with acid comes a price, PH. It was at 7!
So I added a air stone on a air pump to the saltwater over night. Bingo! This morning it was at 7.8!
Did the water change and everything in the DT looks great!
I'll be doing this from now on!
mta_morrow
Of course I have room for 1 more fish!
- Joined
- Sep 15, 2015
- Messages
- 7,234
- Reaction score
- 26,151
- Location
- Sumter, SC
- What state or country do you live in
- South Carolina
That’s a lot of work! I got tired just reading about it!
OP
OP
Flippers4pups
Fins up since 1993
I hear you Mike! A lot to do just to adjust alkalinity and maybe just a touch of OCD I presume.
OP
OP
Flippers4pups
Fins up since 1993
Yep.
saltyhog
blowing bubbles somewhere
- Joined
- Jan 2, 2014
- Messages
- 9,413
- Reaction score
- 15,937
- Location
- Conway, Arkansas
- What state or country do you live in
- Arkansas
Yep, that's the only reason I switched from it. Got an alkalinity spike every water change.
OP
OP
Flippers4pups
Fins up since 1993
Okay it's been awhile since I updated. I like a lot of people are busy with family friends and work.
The focus as of late has been on my salt mix. The box of IO I bought to do water changes after the fritz issues had some very hard clumps in it. It would precipitate a little bit of calcium at the bottom of the mixing station. As I have stated before, testing its alkalinity show to be very high.
Not trusting this I went out today and bought a brand new bucket of IO. It's completely powder inside as it should be. That's a good sign.
So I clean the mixing station barrels out. Drained my ATO top off reservoir and cleaned it with some vinegar water. I had never cleaned it since I had set it up and I had a funky almost moldy smell to it.
With all that done and dried I filled up the mixing barrel with 20 gallons and filled up the ATO reservoir with freshwater. Hopefully my salt issues are now resolved.
Now on to the bacterial Bloom that I'm still fighting in the display tank. With a bad bulb ship to me for my UV sterilizer and questioning whether or not the unit may have a bad ballast, I decided to buy a brand new UV sterilizer. A aqua UV unit and it should be here Monday. No matter what I do I cannot stop this bacterial bloom. hopefully this new unit will clarify the water very quickly.
That's all the update I have for now. Stay tuned.
The focus as of late has been on my salt mix. The box of IO I bought to do water changes after the fritz issues had some very hard clumps in it. It would precipitate a little bit of calcium at the bottom of the mixing station. As I have stated before, testing its alkalinity show to be very high.
Not trusting this I went out today and bought a brand new bucket of IO. It's completely powder inside as it should be. That's a good sign.
So I clean the mixing station barrels out. Drained my ATO top off reservoir and cleaned it with some vinegar water. I had never cleaned it since I had set it up and I had a funky almost moldy smell to it.
With all that done and dried I filled up the mixing barrel with 20 gallons and filled up the ATO reservoir with freshwater. Hopefully my salt issues are now resolved.
Now on to the bacterial Bloom that I'm still fighting in the display tank. With a bad bulb ship to me for my UV sterilizer and questioning whether or not the unit may have a bad ballast, I decided to buy a brand new UV sterilizer. A aqua UV unit and it should be here Monday. No matter what I do I cannot stop this bacterial bloom. hopefully this new unit will clarify the water very quickly.
That's all the update I have for now. Stay tuned.
saltyhog
blowing bubbles somewhere
- Joined
- Jan 2, 2014
- Messages
- 9,413
- Reaction score
- 15,937
- Location
- Conway, Arkansas
- What state or country do you live in
- Arkansas
Hang in there Don! At least bacterial blooms are not too hard on the tank as long as you're able to maintain good O2 levels. Good skimming, limiting organics (stop carbon dosing if doing it) patience and a well functioning UV are all I can think of. You will like that Aqua UV, I love mine and have it semi-permanently set up.
OP
OP
Flippers4pups
Fins up since 1993
No carbon dosing here. Skimming wet. Going to do that 20 gallon water change and just wait for the UV to show.
Yes the Aqua UV was one I should have went with when I got the Danner. All in all it worked well, but I should have read all the reviews before buying it. Most Danner units ballast craps out after a year. $75 for the ballast and $50 for the bulb equals a brand new Aqua UV unit. All the reviews on them are very good and I'm only using it to clarify the water column only. Can't wait to get it installed!
All work done in the fish room down stairs, even cleaned the skimmer. Now to sit in my recliner and enjoy some fall flavor:
RichtheReefer21
Scrap Yard Reefer
Excellence Award
Reef Tank 365
Article Contributor
Reef Squad Emeritus
Hospitality Award
Theres enough headaches in this hobby, it's a shame we have to walk on eggshells because we cant trust QC of some of the biggest names in the game.
Hope you get it figured out and things settle back out for ya... hang tough.
#reefinainteasy
Hope you get it figured out and things settle back out for ya... hang tough.
#reefinainteasy
OP
OP
Flippers4pups
Fins up since 1993
Aquacave. 15watt.
OP
OP
Flippers4pups
Fins up since 1993
Water change done. Shipment of the UV shows it's now at the local USPS office. Thank God! Maybe today, most likely tommorow!
More I think about the salt issues, the more I think I'll be buying it from Petco. They price match, I can open the bucket in store and inspect it for hardness and they always have some in store. Can't say that about my LFS's. I could buy from them if they have it, but they are higher priced. If they will price match, then maybe.
Just don't ever think I'll change salt brands again. IO has been good to me all these years.
More I think about the salt issues, the more I think I'll be buying it from Petco. They price match, I can open the bucket in store and inspect it for hardness and they always have some in store. Can't say that about my LFS's. I could buy from them if they have it, but they are higher priced. If they will price match, then maybe.
Just don't ever think I'll change salt brands again. IO has been good to me all these years.
TOP 10 Trending Threads
-
- Sticky
