Par 38 Fuge Light Mounting

[kayl]

What are you guys using to mount par38's over your fuges?

I picked up a led par38 from lowes and the clip-on worklight fixture doesn't stand a chance; the bulb is way too heavy!

What solutions are you guys using?

 

[reefsponge]

I used the clip on from HD. Just loosen the wingnut to remove the clamp and use a screw with a larger head in the clamp on/reflector connection point. Screw in your screw to adequate location and tighten the reflector onto that. Now you have swivel motion up until you really tighten the wingnut to the position you want. Hope this makes sense. Good luck:)

 

[WrasseSandwich]

here's a DIY one I made, cost me around $10 to make, it has a 30lbs magnet that I stuck to my steel stand

 

[Gitsoe]

Lowes sells a bunch of light mounts, that's what I used. I screwed it to the top of the stand