The Modified Black Box Thread

[Steven Garland]

so to think 450 nm is better color for corals???

Absolutely !!

 

[saltyfilmfolks]

why you take off most lens but not all lens for what purpose to do?

Increased spread slightly , kept some shimmmer and “punch” for the bottom of the tank for my clams.

 

[Ashley Kekua]

ok

Absolutely !!

thank you for replyment!

 

[Ashley Kekua]

No, it was 90 and 120 deg lenses. The white(120) and black(90).


I'm using a lens to protect the UV(390nm) chips. They degrade faster with "secondary" lenses.


Underneath that lens, is a softer layer. [I'm not sure what it's called?]

(above is my test chip)

I'm comparing longevity from a normal chip to a decapped chip.

If you remove that? do you lose the function of LED?? Can LED still work even though when you remove the LENS?

 

[reeferfoxx]

If you remove that? do you lose the function of LED?? Can LED still work even though when you remove the LENS?

Removing the lens has no effect on the operation of the light. There will still be a lens on the LED itself. That LED is soldered to the board and cannot be removed without a soldering tool.

 

[McPikie]

The light will spread out a lot more, but then you lose some PAR

 

[Ashley Kekua]

i fixed it! I removed lens from center only...and left the lens on the edges and BAM! even blanket of par! I'm happy thank you for this thread

 

[Reefs of Space]

This is my white channel
4- UV 410nm
10- Royal Blue 440nm
2- Green 520nm
2- Red 660nm
2- 3000k
2- 6500k
6- 10000k-15000k

 

[Reefs of Space]

This is my blue channel
2- UV 390nm
3- UV 410nm
2- UV 420nm
2- Royal Blue 440nm
18- Blue 470nm

 

[Reefs of Space]

Both channels 55 3w LEDs
2-390nm
7-410nm
2-420nm
10-440nm
20-470nm
2-520nm Green
2-660nm Red
2-3000k
2-6500k
6-10000k

 

[Ashley Kekua]

this loook really good!

 

[rmiles54]

Where is everyone purchasing the replacement diodes

 

[McPikie]

Ebay for me

 

[Reefs of Space]

Where is everyone purchasing the replacement diodes

https://go.skimresources.com/?id=85.../alerts&xtz=300&jv=13.13.4-stackpath&bv=2.5.1

Just make sure you get ones without the pcb. The shipping took 2 1/2 weeks from China

 

[Ashley Kekua]

https://go.skimresources.com/?id=85957X1538380&xs=1&isjs=1&url=https://www.ebay.com/itm/3W-High-Power-LED-Chip-Light-Beads-White-Warm-red-green-UV-IR-emitting-diode-/142416640027?varId=441423484960&txnId=1619461246004&xguid=e7f7e5f9b107be96ad9e8cb8f404313d&xuuid=a90904ca4217ca4082d162413e10d289&xsessid=&xcreo=0&xed=0&sref=https://www.reef2reef.com/threads/changing-the-spectrum-of-chinese-black-box-led-light.502127/page-2#post-5719226&pref=https://www.reef2reef.com/account/alerts&xtz=300&jv=13.13.4-stackpath&bv=2.5.1

Just make sure you get ones without the pcb. The shipping took 2 1/2 weeks from China

Thank you i just buy some more of this ! much help!

 

[Patncori]

Best Driver upgrade for a 165w...??

 

[Pyrosteve]

I wanted to get some opinions on modifying my WIFI BB. I'm trying to mimic the original SB Basic box a little better without changing out every diode.

Here's the original LED array I have now...

and the new layout...

What do you think of the spectrum/spread? Too much white in the center?
All of the lenses are 120 I have now. Should add some 90s?

Here's the basic I'm trying to copy....

Any other suggestions?

 

[Dana Riddle]

I wanted to get some opinions on modifying my WIFI BB. I'm trying to mimic the original SB Basic box a little better without changing out every diode.

Here's the original LED array I have now...

and the new layout...

What do you think of the spectrum/spread? Too much white in the center?
All of the lenses are 120 I have now. Should add some 90s?

Here's the basic I'm trying to copy....

Any other suggestions?

Personally, I would replace the 3500K with 6500K. I'm unsure of the PPFD this will produce and the mounting height above the waterline - these will determine the lenses used.

 

[Pyrosteve]

Personally, I would replace the 3500K with 6500K. I'm unsure of the PPFD this will produce and the mounting height above the waterline - these will determine the lenses used.

The light is 8" from the waterline and 24" to the sand bed. I'm also trying to cover 30" width so I'm thinking I may need use 120s.

 

[Flippers4pups]

I was helping a member here about led diode layouts for the Mars aqua black boxes, come to find out that the new ones that are being sold have a totally different board on them with different diode chips.

This will make them more difficult to modify. Thoughts?