Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looks sweet !Water test was successful, no leaks. I tested the par on the kessil and it is going to work out well over the lagoon
Looking great! Anything with the 8020 stand that you would change? I'm starting to get my parts list together soon, so trying to figure out counter bore, corner brackets, etc....
Same tank with similar ghost style overflow, but will have a 24" sump, so I'll probably go 26" wide on the stand and 21" front to back. Most likely 32" high? I'll add a center piece on the top and bottom for added support and maybe side support as well? I'll be using the black 10 series extrusion from tnutz. The "legs" will go under the top extrusion and go to the floor with leveling feet, while the bottom will connect between the legs.
I would strongly consider using the RFG on your return, it's a simple way of adding random flow to the tank without adding multiple powerheads.
https://vividcreativeaquatics.com/product-category/water-movement/
Sounds like a solid plan.Those are good but my flow isn’t high enough for it to work. I only do about 5 times turnover in my display tanks so for the new tank that will be about 100-125 gph. I rely on internal pumps for water flow. I have a 1k gyre and right now there is a ton of water movement at 80%. I will have to see how it is once I add rock work but I’m going with an open scape so there should t be too many dead areas. If there are I will add a second gyre or a mp10.
Parts lists and diagrams of the stands would be awesome?!